Rear Bumper letter inserts
Thread Starter
Drifting
Joined: Jun 2007
Posts: 1,465
Likes: 246
From: Toronto Ontario
Rear Bumper letter inserts
I saw a black coupe with chrome looking inserts.. looked good.
Anybody have pics.... maybe on a red vert...
Also I see some really inexpensive sets, under $5, on ebay... and some for $50 a set in chrome...
Any advise and of course pics anybody..
Anybody have pics.... maybe on a red vert...
Also I see some really inexpensive sets, under $5, on ebay... and some for $50 a set in chrome...
Any advise and of course pics anybody..
Le Mans Master
Joined: May 2007
Posts: 5,383
Likes: 6
From: hagerstown md
St. Jude Donor '08-'09
Ebay, you never know the quality, or exactly what you might be getting. Could be cheap plastic that will have to be replaced in a month or so. Get the polished stainless steel ones from Chip at CCA. He's a vendor here, and one great guy to order from. Gets things out FAST. At work, don't have pics here. You can find my posts about them, there are pics in it. Good luck! 
Drifting
Joined: May 2004
Posts: 1,648
Likes: 0
From: Thornton Colorado
No pic's sorry but do a search in the for sale and a supporting vendor sells the front and rear sets for $79 if I remember right. be careful what you buy some are just like reflective tape and other's are thicker chrome letters (not sure what there made of but I guess their about 1/16 to 1/8 of an inch thick) Hope that helps
Team Owner
Joined: Oct 2001
Posts: 46,765
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
http://forums.corvetteforum.com/show....php?t=1696932
Terminal Vette Addict
Joined: Feb 2007
Posts: 1,634
Likes: 46
From: Philly PA
Chip @ CCA. BUT be warned on the "R", take a snips (Wiss) and snip the point of the R off. Itty bitty titty witty snip.
It sticks out just a bit and snaps stuff. THe R's seem to have the prob for everyone.
Also follow the directions to clean, alcohol, pre adhesive. No shortcuts.
THe 5 buck sets are stickers.. dont do that. Its lame.
It sticks out just a bit and snaps stuff. THe R's seem to have the prob for everyone.
Also follow the directions to clean, alcohol, pre adhesive. No shortcuts.
THe 5 buck sets are stickers.. dont do that. Its lame.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Jan 2005
Posts: 836
Likes: 0
From: WESTMONT ILLINOIS
Ebay, you never know the quality, or exactly what you might be getting. Could be cheap plastic that will have to be replaced in a month or so. Get the polished stainless steel ones from Chip at CCA. He's a vendor here, and one great guy to order from. Gets things out FAST. At work, don't have pics here. You can find my posts about them, there are pics in it. Good luck!
see avatar
Drifting
Joined: Jul 2001
Posts: 1,920
Likes: 1
From: Camelot of the Mid West
I got a set of the black plastic from Mid America (car is Pewter so I didn't think the SS would look as good)
I like the way they set off the rear bumper but in a year I think I have had to replace the double sided tape on every letter. Luckily they always seem to fall off when I am washing the car so I haven't lost any letters.
Don't know if the original tape was crap or not
I like the way they set off the rear bumper but in a year I think I have had to replace the double sided tape on every letter. Luckily they always seem to fall off when I am washing the car so I haven't lost any letters.
Don't know if the original tape was crap or not
Instructor
Joined: Feb 2007
Posts: 165
Likes: 0
From: Madrid-Spain
Melting Slicks
Joined: Feb 2002
Posts: 2,956
Likes: 2
From: Indianapolis In
Got mine form MidAmerica or Corvette Central. They are the raised rubbery type like Cyberdine Graphics sells.
http://stores.ebay.com/Cyberdine-Decals
Now look at the letters & not the bumper stickers.........
Drifting
Joined: Jun 2004
Posts: 1,887
Likes: 2
From: Havin' fun in Frederick, MD!!!
St. Jude Donor '05 '09
I wouldn't kick either of those bumper covers out of bed!
Having said that, I pulled a fast one lately. I had cheapo inserts from the NCM on my car, and when I got rear-ended recently I had the solid stainless inserts (from SSinserts) Installed by the body shop. I'm happy!
Hmmm... As I reconsider, I don't really know that the body shop got the replacement inserts from SSinserts. I should give them a call and find out!
Having said that, I pulled a fast one lately. I had cheapo inserts from the NCM on my car, and when I got rear-ended recently I had the solid stainless inserts (from SSinserts) Installed by the body shop. I'm happy!
Hmmm... As I reconsider, I don't really know that the body shop got the replacement inserts from SSinserts. I should give them a call and find out!
Last edited by Red C6 Z06; Aug 15, 2007 at 07:29 PM.
Pro
Joined: Sep 2004
Posts: 580
Likes: 1
From: Ironton Ohio
I bought a set of polished stainless of flea-bay for my 2000 and the fit and finish were great. I bought a set of the uber-expensive titanium black SSinserts for my 02 model and they dont fit all that well especially the fronts. I feel sure a high pressure car wash would blow them off. Live and learn I guess......
Melting Slicks
Joined: Feb 2002
Posts: 2,956
Likes: 2
From: Indianapolis In
I bought a set of polished stainless of flea-bay for my 2000 and the fit and finish were great. I bought a set of the uber-expensive titanium black SSinserts for my 02 model and they dont fit all that well especially the fronts. I feel sure a high pressure car wash would blow them off. Live and learn I guess......
