Opinions Please??
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
Opinions Please??
While I'm waiting for my warranty wheels to show up (Machined Face ZO6's again) I'm trying to polish up little details on the cars exterior. One thing that's haunted me since I got the wheels were the C6 flags on the center caps. Now, those flags are faded and look like butt. So I'm thinking of going this route: Paint them black, clear coat and all, then either leave black or put a silver C5 logo on them. Photoshop attempt for your viewing pleasure.
Now:
After:
Another route I"m thinking is going with the chrome center caps with the engraved C5 logo. My only issue there is that they're knock-off's and don't have the proper flag emblems. But they still look ok.
Thoughts? Right now I'm leaning for the black simply because it'll cost me a can of paint and and a can of clear.
Now:
After:
Another route I"m thinking is going with the chrome center caps with the engraved C5 logo. My only issue there is that they're knock-off's and don't have the proper flag emblems. But they still look ok.
Thoughts? Right now I'm leaning for the black simply because it'll cost me a can of paint and and a can of clear.
Le Mans Master
Joined: Aug 2005
Posts: 7,890
Likes: 0
From: FL
I don't like the black. What are the current centercaps made of? Why don't you have the c6 logo machined off if they are metal. If they are plastic which I assume, can't you just place the C5 logo decal right over the C6 or is that one bigger?
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
The C6 flags on there are pretty big. Plus, I don't think I can get them off without doing some noticable damage to the plasti-chrome surface (Yeah, they're plastic).
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Burning Brakes
Joined: Apr 2006
Posts: 940
Likes: 0
From: Surprise Arizona
I wouldn't have thought that I would like the black, but they blend well with your window tint. I think it would look great either way as long as you did a "clean" job painting the caps. 
Thread Starter
Race Director
Joined: Mar 2004
Posts: 12,466
Likes: 886
From: Fort Wayne IN
2025 C5 of the Year Finalist - Modified
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
I think I'm going to try it out first with my current center caps, and if they don't work out to my liking, I'll go back to chrome. I should be able to get a pretty good finish on them if I take my time. The black will go with the setup on the car being that the insides of the spokes are black, the TPS retaining nuts were powdercoated black, the blackouts on the car, and as stated before, the tint. Oh yeah, the lower rear fascia will soon be black also. 
I just wish I could find a center cap with a machined face to them like the rest of the wheels. If you're up close to them the center cap and face of the wheel don't match up and it bothers me.
I just wish I could find a center cap with a machined face to them like the rest of the wheels. If you're up close to them the center cap and face of the wheel don't match up and it bothers me.