Apsis' C5 Flat Mini Mud Flap $39.98/set
Thread Starter
Banned Scam/Spammer
Joined: Nov 2006
Posts: 17,099
Likes: 648
St. Jude Donor '07
Apsis' C5 Flat Mini Mud Flap $39.98/set
Hi C5 Guys,
We have developed our Flat Mini Mud Flap for C6 and we got very good response from C6 customers. Now we develop this item available for C5 too.
This is the "Mini" style that is functional & unnoticeable and the price is very affordable.
It requires "No Drilling, No Metal Clips" installation.
How to install:
For the Front Wheel, we reuse the existing two factory fasteners and holes.
For the Rear Wheel, it's the combination of 3M tape and our special device called "Locking Plates". We have pre-installed the special "Locking Plate" & 3M tape on our parts and we have also pre-bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well wall. All you have to do is just to slide the "Locking Plates" through the wheel well wall & press tight and then peel off 3M tape lining & press against wheel well. That's it! Very easy installation.
This style is designed for customers who want unnoticeable, functional & very affordable. If you like the more stylish "Molded" Splash Guards, we are working on it and will have prototype pictures shortly.
Price: $39.98/set (for 4 wheels)
Delivery: In stock, ready to ship immediately
How to order: PM, Send email to apsisusa@aol.com or call toll free 1-800-68APSIS (6827747)
Here are the pictures-----
We have developed our Flat Mini Mud Flap for C6 and we got very good response from C6 customers. Now we develop this item available for C5 too.
This is the "Mini" style that is functional & unnoticeable and the price is very affordable.
It requires "No Drilling, No Metal Clips" installation.
How to install:
For the Front Wheel, we reuse the existing two factory fasteners and holes.
For the Rear Wheel, it's the combination of 3M tape and our special device called "Locking Plates". We have pre-installed the special "Locking Plate" & 3M tape on our parts and we have also pre-bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well wall. All you have to do is just to slide the "Locking Plates" through the wheel well wall & press tight and then peel off 3M tape lining & press against wheel well. That's it! Very easy installation.
This style is designed for customers who want unnoticeable, functional & very affordable. If you like the more stylish "Molded" Splash Guards, we are working on it and will have prototype pictures shortly.
Price: $39.98/set (for 4 wheels)
Delivery: In stock, ready to ship immediately
How to order: PM, Send email to apsisusa@aol.com or call toll free 1-800-68APSIS (6827747)
Here are the pictures-----
Last edited by apsisusa; Nov 5, 2007 at 08:39 PM.
Thread Starter
Banned Scam/Spammer
Joined: Nov 2006
Posts: 17,099
Likes: 648
St. Jude Donor '07
Personally I don't like it either. But guess what, you cannot believe how many C6 customers gave unbelieveable high rating for this kind of cheap Flat Mud Flap before we make ours available.
The first time when I personally saw this kind of cheap Mud Flap (our competitor's product) on one of our customer's car, I was speechless and couldn't believe such simple product could win so much apprauses. But since many C6 customers want it, so we put our better idea to it to have even better & easier installation. We offer such similiar product with better quality but at much cheaper price. $39.98 vs $49.99
Well, we still sell many of this kit for C6 already. Business is business. Since it's so easy to make, we offer for C5 too.
The first time when I personally saw this kind of cheap Mud Flap (our competitor's product) on one of our customer's car, I was speechless and couldn't believe such simple product could win so much apprauses. But since many C6 customers want it, so we put our better idea to it to have even better & easier installation. We offer such similiar product with better quality but at much cheaper price. $39.98 vs $49.99
Well, we still sell many of this kit for C6 already. Business is business. Since it's so easy to make, we offer for C5 too.
Thread Starter
Banned Scam/Spammer
Joined: Nov 2006
Posts: 17,099
Likes: 648
St. Jude Donor '07
We don't have C5 pictures handy so we use C6 picture to show you how it works.
As you can see, we have Pre-Bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well.
All you have to do is to slide those "Locking Plates" through the wheel well wall and at the same time remove the 3M tape red lining and press against wheel well as hard as you can on both 3M tape & Locking Plates. That's it.
As you can see, we have Pre-Bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well.
All you have to do is to slide those "Locking Plates" through the wheel well wall and at the same time remove the 3M tape red lining and press against wheel well as hard as you can on both 3M tape & Locking Plates. That's it.
Thread Starter
Banned Scam/Spammer
Joined: Nov 2006
Posts: 17,099
Likes: 648
St. Jude Donor '07
We just got this comment from one C6 customer in our thread in C6 section. We copy it and post here for C5 customer's reference. You can go to C6 to read the original post.
"Actually i bought a set of mud flaps and they are really cool. barely noticeable and for that price $38 brother....you can't go wrong. Maybe a bit difficult to understand him when ordering on the phone, because of his strong accent, but the product speaks for itself!
Oh AND its made in the USA.....support our fellow citizens"
"Actually i bought a set of mud flaps and they are really cool. barely noticeable and for that price $38 brother....you can't go wrong. Maybe a bit difficult to understand him when ordering on the phone, because of his strong accent, but the product speaks for itself!
Oh AND its made in the USA.....support our fellow citizens"
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Melting Slicks
Joined: Aug 2006
Posts: 2,219
Likes: 1
From: Bridgewater NJ
Administrator
Joined: Mar 2001
Posts: 368,536
Likes: 24,826
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Looks like they would do a good job of protecting the car - best of luck with the product. If I didn't already have a set on my car, I'd get these. Can't beat the price. At least I know where to get them should I need a replacement set. 
Melting Slicks
Joined: Jan 2003
Posts: 2,056
Likes: 0
From: monroe city mo
Hi C5 Guys,
We have developed our Flat Mini Mud Flap for C6 and we got very good response from C6 customers. Now we develop this item available for C5 too.
This is the "Mini" style that is functional & unnoticeable and the price is very affordable.
It requires "No Drilling, No Metal Clips" installation.
How to install:
For the Front Wheel, we reuse the existing two factory fasteners and holes.
For the Rear Wheel, it's the combination of 3M tape and our special device called "Locking Plates". We have pre-installed the special "Locking Plate" & 3M tape on our parts and we have also pre-bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well wall. All you have to do is just to slide the "Locking Plates" through the wheel well wall & press tight and then peel off 3M tape lining & press against wheel well. That's it! Very easy installation.
This style is designed for customers who want unnoticeable, functional & very affordable. If you like the more stylish "Molded" Splash Guards, we are working on it and will have prototype pictures shortly.
Price: $39.98/set (for 4 wheels)
Delivery: In stock, ready to ship immediately
How to order: PM, Send email to apsisusa@aol.com or call toll free 1-800-68APSIS (6827747)
Here are the pictures-----
We have developed our Flat Mini Mud Flap for C6 and we got very good response from C6 customers. Now we develop this item available for C5 too.
This is the "Mini" style that is functional & unnoticeable and the price is very affordable.
It requires "No Drilling, No Metal Clips" installation.
How to install:
For the Front Wheel, we reuse the existing two factory fasteners and holes.
For the Rear Wheel, it's the combination of 3M tape and our special device called "Locking Plates". We have pre-installed the special "Locking Plate" & 3M tape on our parts and we have also pre-bent the special "Locking Plates" to have just enough clearance to accomodate the thickness of wheel well wall. All you have to do is just to slide the "Locking Plates" through the wheel well wall & press tight and then peel off 3M tape lining & press against wheel well. That's it! Very easy installation.
This style is designed for customers who want unnoticeable, functional & very affordable. If you like the more stylish "Molded" Splash Guards, we are working on it and will have prototype pictures shortly.
Price: $39.98/set (for 4 wheels)
Delivery: In stock, ready to ship immediately
How to order: PM, Send email to apsisusa@aol.com or call toll free 1-800-68APSIS (6827747)
Here are the pictures-----
Melting Slicks
Joined: Apr 2006
Posts: 2,045
Likes: 9
From: Montreal ** Enjoy the ride !!
Better pics please
Thread Starter
Banned Scam/Spammer
Joined: Nov 2006
Posts: 17,099
Likes: 648
St. Jude Donor '07
