Winter mods
Thread Starter
Race Director
Joined: Dec 2005
Posts: 11,664
Likes: 15
From: Wellsboro Pa
Safety Car
Joined: Apr 2003
Posts: 3,968
Likes: 0
From: Biloxi MS Theres something happenin' here, What it is ain't exactly clear.....
we dont get a winter (often) down here.
so I already did my mods - C6 Z06 shocks, C5 Z06 sway bars, powder coated calipers and brackets, 2 piece Eradispeed rotors (powdercoated the hats black to match the caliper brackets), K&N filter in the Vararam.
Still have chrome lettering to put in the rear logo and stainless brake lines to install.
And the insides of the HRE wheels to polish -
so I already did my mods - C6 Z06 shocks, C5 Z06 sway bars, powder coated calipers and brackets, 2 piece Eradispeed rotors (powdercoated the hats black to match the caliper brackets), K&N filter in the Vararam.
Still have chrome lettering to put in the rear logo and stainless brake lines to install.
And the insides of the HRE wheels to polish -
Thread Starter
Race Director
Joined: Dec 2005
Posts: 11,664
Likes: 15
From: Wellsboro Pa
The nice thing about owning the car only 3 months is that there is more to be done this winter.
First things first....install lift in shop! Then...
Headers, exhaust, intake, catch can, rocking seat fix, new rubber, partition, leds for interior lighting, dock for iphone, power inverter, and maybe door speakers
First things first....install lift in shop! Then...
Headers, exhaust, intake, catch can, rocking seat fix, new rubber, partition, leds for interior lighting, dock for iphone, power inverter, and maybe door speakers
Thread Starter
Race Director
Joined: Dec 2005
Posts: 11,664
Likes: 15
From: Wellsboro Pa
we dont get a winter (often) down here.
so I already did my mods - C6 Z06 shocks, C5 Z06 sway bars, powder coated calipers and brackets, 2 piece Eradispeed rotors (powdercoated the hats black to match the caliper brackets), K&N filter in the Vararam.
Still have chrome lettering to put in the rear logo and stainless brake lines to install.
And the insides of the HRE wheels to polish -
so I already did my mods - C6 Z06 shocks, C5 Z06 sway bars, powder coated calipers and brackets, 2 piece Eradispeed rotors (powdercoated the hats black to match the caliper brackets), K&N filter in the Vararam.
Still have chrome lettering to put in the rear logo and stainless brake lines to install.
And the insides of the HRE wheels to polish -
Thread Starter
Race Director
Joined: Dec 2005
Posts: 11,664
Likes: 15
From: Wellsboro Pa
Thread Starter
Race Director
Joined: Dec 2005
Posts: 11,664
Likes: 15
From: Wellsboro Pa
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Jun 2005
Posts: 2,396
Likes: 52
From: Sicamous BC
LG Pro's & cat's are laying on the floor, I have ordered ported AFR 205's & ported Fast 90/90. Need to figure out the cam & valvetrain, should probably do the EWP & underdirve....any advice?
