Front bumper cover removal
Thread Starter
Advanced
Joined: Nov 2007
Posts: 70
Likes: 0
From: Kernersville North Carolina
Front bumper cover removal
I have ordered a Tigershark front facia, anyone have any info as to how much trouble it is to get the old one off, any tricks I should know about, anything to watch for when taking the old one off? Thanks
Team Owner
Joined: Mar 2001
Posts: 25,889
Likes: 7
From: Virginia Beach
CI 3-5-6-7-8 Veteran
It's easy... the Tigershark comes with good instructions. However, you don't have to take the headlights out as they say, you can reach the two nuts on the fendeer-to-facia brackets with extensions from below or small hands from above. You'll see when you get to it.
Make sure to bag/tag all your hardware.
Make sure to bag/tag all your hardware.
Team Owner
Joined: Mar 2001
Posts: 25,889
Likes: 7
From: Virginia Beach
CI 3-5-6-7-8 Veteran
Here's my tear-down thread from last year, hope it gives you an idea of what you need to do.
http://forums.corvetteforum.com/show....php?t=1475203
http://forums.corvetteforum.com/show....php?t=1475203
Thread Starter
Advanced
Joined: Nov 2007
Posts: 70
Likes: 0
From: Kernersville North Carolina
Thanks, doesnt look like to much problem, I used to own an aircraft repair shop so I think I will be fine, it just never hurts to ask someone whos done it before. I will post pictures after I get it installed. thanks again.
