When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need a clutch that will hold over 750RWTQ. After a fun joust with the spray, my clutch is on its last leg. What have you tried and liked, or disliked, that can hold that power?
I have a findanza flywheel and a spec3+ clutch. I dont have near that much rear wheel torque though. It grabs really hard and it's and on and off deal in first. Either It's grabbing or its not and once it grabs you hace to go. If that makes any sense. It also Squeeks.
So if your driving in traffic it would be a beotch.
Originally Posted by TXZ0603
Any one have any feedback on the fidanza dual ceramic clutch? They have a torque rating of 900 ftlbs, with a msrp of 1495.00
From: AKA Harvey Mushman-I know just enough to be dangerous "Those who sacrifice liberty for safety deserve neither"- B. Franklin
Senior Member
Cruise-In V Veteran
I'd do a search or post this in the FI section. Textralia will probably get the most votes. I don't have that kind of power but my OZ700 almost feels like the stocker.
I wish I knew more about that level of tq. I have an Exoskel and love it. I think the drivability is excellent. It does make a fair amount of noise if you let the pedal out at red lights. I don't and it has never bothered me. Good Luck with your decision.
I forgot to mention that my Excoskel does not have a stock feel, but it does not take a muscle man to press the clutch pedal in. I will say after 5k it is really does hold my setup nice and I have a few 1/4 passes along with several 1 mile runs to 180 mph and 3 sprited hill country runs this summer of 150+ miles on each run. Clutch has done the job just fine, though it did chatter quite a bit in the first 500 miles, but that is long gone