Your's and CSTYLEZ have the two best looking pewter vettes around 
I Painted My Butt!!!
Thread Starter
Burning Brakes
Joined: May 2002
Posts: 1,079
Likes: 1
From: Bradenton, FL
Looks greay Ray. I to wanted mine with a slight contrast so when I did my Tigershark last year my painter added just a little dark color to the Pewter and it looked great on the test panel, nice and subtle with a bit of contrast. Once we got it done on the car you can barely see the difference due to the way the bumper contours in that insert. We also did the same thing around the screen inserts in the front.
Pro
Joined: Nov 2006
Posts: 574
Likes: 0
From: ARLINGTON TEXAS
Nice ***
I Couldn't decide on which color, but I knew I wanted to do something.
So, I decided to stick with a Corvette color, and settled on Med. Spiral Gray Metalic. I've always loved that color and I think it's just subtle enough to pop against the pewter.
Whatcha think boys and girls? (If you don't like it, that's okay. But, please be nice)
So, I decided to stick with a Corvette color, and settled on Med. Spiral Gray Metalic. I've always loved that color and I think it's just subtle enough to pop against the pewter.
Whatcha think boys and girls? (If you don't like it, that's okay. But, please be nice)
Nice CORVETTE!!!
Pro
Joined: Nov 2006
Posts: 574
Likes: 0
From: ARLINGTON TEXAS
Looks greay Ray. I to wanted mine with a slight contrast so when I did my Tigershark last year my painter added just a little dark color to the Pewter and it looked great on the test panel, nice and subtle with a bit of contrast. Once we got it done on the car you can barely see the difference due to the way the bumper contours in that insert. We also did the same thing around the screen inserts in the front.
Burning Brakes
Joined: Nov 2004
Posts: 961
Likes: 0
From: Albuquerque NM
Nice - but I'm biased!
I have an '02 Quicksilver coupe with Tigershark front and rear fascias. I painted my TS rear Med Spiral Grey like yours and ALSO painted the inset area around the exhaust below. I used the same paint color for the center area of my MCM CF hood.
Gordon
I have an '02 Quicksilver coupe with Tigershark front and rear fascias. I painted my TS rear Med Spiral Grey like yours and ALSO painted the inset area around the exhaust below. I used the same paint color for the center area of my MCM CF hood.
Gordon
Note: the last 2 pics were taken before the TS rear.
Gordon
Last edited by gdphillipsvette; Feb 15, 2008 at 10:25 AM. Reason: addditional info
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski