[Z06] New Shift knob install
Thread Starter
Racer
Joined: Aug 1999
Posts: 321
Likes: 0
From: Aiken SC
New Shift **** install
I just had a prototype shifter **** installed on both of my six speeds by a company that is just getting into the Vette market. The owner, George Ciamillo, has a new 02 Z06 and I think all us Corvette owners are going to benefit from his designing things to go on his new ride! I have a link going to the install page and also one going to his company, so you can e-mail him with any questions you might have. George is in our local club and yes, he did give these out for us to try and yes I like them. Great feel, was able to make the shifter lower on a stock stick than with the stock or the other aftermarket shift **** that I previously had. He is waiting on our input, but can be up in running in less than 2 weeks with production. Take a look!
George plans on several different finishes. One will be the actual color of a Z06 wheel, one chromed, and one like the stock wheels on a C5 - non polished. The aluminum **** is threaded, only caution is make sure the threads on your shifter are not pushed down when installing. This allows you to adjust the height of the shifter.
http://casualcorvettes.homestead.com/****.html
http://www.mgwltd.com/default.htm
George plans on several different finishes. One will be the actual color of a Z06 wheel, one chromed, and one like the stock wheels on a C5 - non polished. The aluminum **** is threaded, only caution is make sure the threads on your shifter are not pushed down when installing. This allows you to adjust the height of the shifter.
http://casualcorvettes.homestead.com/****.html
http://www.mgwltd.com/default.htm
Racer
Joined: Aug 2000
Posts: 498
Likes: 3
From: huntington NY
Re: New Shift **** install (Torch)
The **** looks great! The key is how does it feel in your hand and the way it will allow for the "gating" between shifts. It appears that the design will allow for a better feel of the gate in our shifters. How is the infamous 2-3 shift with this ****? Would they consider a "Torch Red" **** to match the modified interior on a Z06? How about an engaved shift pattern in the top of the ****? I for one would order one.
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
:rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes: :rolleyes:
Thread Starter
Racer
Joined: Aug 1999
Posts: 321
Likes: 0
From: Aiken SC
Re: New Shift **** install (rickvette)
It is a natural feel in your hand and let's you grab it or grip it in multiple ways. The finish is what he needs input on. At the present I think he is a little wary on being able to match a color to the red. I think he wants to anodnize (sp) the color. Drop him an e-mail and let him know your thoughts. He is a nice guy and will listen. His address is on his site, under Vice President (he is trying harder!)
Racer
Joined: Aug 2000
Posts: 498
Likes: 3
From: huntington NY
Re: New Shift **** install (Torch)
I E-mailed George two days ago and have not recieved any response! I offered to purchase one and I guess he's either very busy or not interested?
:confused: :confused: :confused: :confused: :confused: :confused: :confused:
:confused: :confused: :confused: :confused: :confused: :confused: :confused:
Thread Starter
Racer
Joined: Aug 1999
Posts: 321
Likes: 0
From: Aiken SC
Re: New Shift **** install (rickvette)
George is very concerned about making this a go with this market. I will make sure he hears about this and gets back to you. Did you send it to his personal e-mail under the Vice President section?
I am enjoying the shift ****, it is definitely worth it. It has to be down computer or something.
I am enjoying the shift ****, it is definitely worth it. It has to be down computer or something.
Racer
Joined: Aug 2000
Posts: 498
Likes: 3
From: huntington NY
Re: New Shift **** install (Torch)
Bob-
Actually I didn't send to his personal E-mail-rather on the web page the box nmed E-Mail. That could explain things. I re-sent this evening to the same E-mail address. I really would like one of these *****!
:cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool:
Actually I didn't send to his personal E-mail-rather on the web page the box nmed E-Mail. That could explain things. I re-sent this evening to the same E-mail address. I really would like one of these *****!
:cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Aug 1999
Posts: 321
Likes: 0
From: Aiken SC
Re: New Shift **** install (rickvette)
and I have arranged for him to be called at work tomorrow and make sure he gets back in touch with you. I have the shift **** in both Vettes, my wife loves hers. I have a satin finish in her car and temporary polished in mine. The Z06 wheel color in the future! Good deal........... :D
[Modified by Torch, 9:04 PM 12/12/2001]
[Modified by Torch, 9:04 PM 12/12/2001]
6th Gear
Joined: Nov 2001
Posts: 6
Likes: 0
From: Carol Stream Illinois
Re: New Shift **** install (Torch)
I emailed George at the site address with my phone number and he called back the same day. Within an hour or so!! Had very interesting conversation with him about the shift ****. Never got availabilty date however... guess I'll have to write him again! :flag
