Full Braided Hose Kit Pics
Melting Slicks
Joined: Nov 2007
Posts: 3,086
Likes: 0
From: Rockledge Florida
St. Jude Donor '08-'09-'10
National Champs Gators 4 St. Jude '09
FedEx delivered my new hose kit this morning.
I will install the 7 hoses, along with the catch can I bought previously, on Thursday. I will take plenty of pics in hope that one or two will adequately show the quality of Chips' product.
WARNING !! WEAR GLOVES !! Got bit twice already and haven't even started the install
Larry
I will install the 7 hoses, along with the catch can I bought previously, on Thursday. I will take plenty of pics in hope that one or two will adequately show the quality of Chips' product.
WARNING !! WEAR GLOVES !! Got bit twice already and haven't even started the install
Larry
Thread Starter
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
Melting Slicks
Joined: Nov 2007
Posts: 3,086
Likes: 0
From: Rockledge Florida
St. Jude Donor '08-'09-'10
National Champs Gators 4 St. Jude '09
Larry
Last edited by LMH4C5; May 7, 2008 at 09:18 AM.
Drifting
Joined: Apr 2006
Posts: 1,267
Likes: 0
From: O'Fallon Missouri
I'm assuming you are talking about the various hose kits and what hoses are included in each kit. Actually, that page listing the 'Hose Key' and the 'Product Key' completely tells me what kit I have purchased, or the one I need to purchase, to get the hoses I want, as well as where each end is connected. I think that page tells everyone EXACTLY how to identify every hose. Even though several of the hoses are the same diameter, they are differentiated by the length of the hose in inches. I simply look at the packaging around the hose, see that it is marked 'Hose C', then look at the Hose Key sheet and that tells me that 'Hose C' goes from the Overflow Tank to the Block. Thats about as simple as it gets. You did a great job marking and identifying each hose and where it goes.
Larry
Larry
Looking forward to the installed hoses and I will take some pics. Surely these will compliment my other bling under the hood.
Thread Starter
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
Safety Car
Joined: Oct 2003
Posts: 3,939
Likes: 14
From: Baltimore Md.
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
Hi Adam, I HAD the 9 set hose kit put on and it looks great. It took 2.5 hours and absolutely no mess to my engine bay. Honestly, I liked my FlexCool upper radiator hose better but I couldn't trust it. I'll probably be at the King of Prussia show, so see you then. Doug
Thanks
Safety Car
Joined: Oct 2003
Posts: 3,939
Likes: 14
From: Baltimore Md.
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
