Door lock won't !!!!!!!
Thread Starter
Instructor
Joined: Nov 2007
Posts: 216
Likes: 0
From: Willie Nelson Country TX
Door lock won't !!!!!!!
My drivers side door lock quit working - the auto lock, unlock & fob all do not function on this door but do on the passenger side. This is on an '02 Z06. Has anyone had any experience running this problem down b4 I pull the door panel and start throwing parts money at the problem? any suggestions welcomed - Thanks
Drifting
Joined: Apr 2007
Posts: 1,998
Likes: 33
From: somewhere in New Hampshire
There's a bunch of info in the tech forum about this, sorry I don't have a pointer but you can do a search. It sounds like one of the relays in the control module, there are instructions on how to fix it. I did it myself and although I found it to be a pain in the butt, the operation was a success and it saved me a ton of money. Good luck. 
Team Owner
Joined: Jul 2006
Posts: 22,154
Likes: 4,166
From: Kannapolis NC
Try that, open the door, push the lock button and wiggle the accordion like wire covering in the hinge area. If the locks work, slide the rubber covering back and disconnect and clean and tighten the pins in the two connectors.
Drifting
Joined: Jan 2005
Posts: 1,650
Likes: 2
From: Bakersfield Ca
Hold on a minute, read this post I did last year, it will answer all of your questions.
http://forums.corvetteforum.com/show....php?t=1606865
http://forums.corvetteforum.com/show....php?t=1606865
