Fender Bender

Reply Subscribe

Thread Tools

Search this Thread

Nov 30, 2008 | 09:51 PM

heckys66

Thread Starter

Advanced

Joined: Nov 2008

Posts: 75

Likes: 0

From: Chandler Arizona

Fender Bender

Hi Iam a newbie

from AZ, I have a 2002 Z06 and I need to change out my RR fender (a wall at PIR got in the way) how in tarnation do you get to the three screws on the rear post, I cant figure a way to get to them.

Nov 30, 2008 | 11:30 PM

Mr.Bill

Race Director

Joined: Jul 2007

Posts: 18,681

Likes: 47

From: Reno is so close to Hell you can see Sparks , State Of Confusion

St. Jude Donor '12-'13-'14

Quote:

Originally Posted by heckys66

Hi Iam a newbie

from AZ, I have a 2002 Z06 and I need to change out my RR fender (a wall at PIR got in the way) how in tarnation do you get to the three screws on the rear post, I cant figure a way to get to them.

I thought I read somewhere that you can just pull the fender off, The screws are not tight from the factory. Maybe someone else can chime in.
Bill

Dec 1, 2008 | 07:00 AM

Lancer033

Le Mans Master

Joined: Aug 2002

Posts: 8,222

Likes: 0

From: Norfolk VA

remove the outside tail light and the fender liner to get to everything. Past that, they should come right out. Nothing special is holding them in.

Dec 1, 2008 | 10:20 PM

heckys66

Thread Starter

Advanced

Joined: Nov 2008

Posts: 75

Likes: 0

From: Chandler Arizona

It worked, thanxs for the info, I the car is ready to rumble, again. Jay.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump