[Z06] Little cutout video
Thread Starter
Racer
Joined: Aug 2007
Posts: 341
Likes: 0
From: Las Vegas NV
Little cutout video
Pretty good sound from the DHM cutouts. The car is ALOT quieter with them closed than it sounds in the video. Only made 445rwhp on friday. Lost some due to the added weight of the 19's and bigger rotors on the rear.
Safety Car
Joined: Dec 2006
Posts: 3,937
Likes: 1,925
From: NC
2025 Corvette of the Year Finalist - Unmodified
2024 C7 of the Year Winner - Unmodified
2023 C7 of the Year Finalist - Unmodified
2019 C6 of Year Finalist (performance mods)
cut outs
JJ sounds very good. I like it . NIce car to I have 03Z with MCM also. Awesum sound both open and closed. 
Thread Starter
Racer
Joined: Aug 2007
Posts: 341
Likes: 0
From: Las Vegas NV
I think the lumping and thumping at idle better through the cutouts but I like the sound of the Ti's at higher revs better.
FYI....I only lost 3rwhp with the cutouts closed going through the stock Ti's. This is my second Z with cutouts and these results have been pretty much the same across the board. Stockers flow pretty well.
FYI....I only lost 3rwhp with the cutouts closed going through the stock Ti's. This is my second Z with cutouts and these results have been pretty much the same across the board. Stockers flow pretty well.
Racer
Joined: Aug 2006
Posts: 263
Likes: 0
From: gulf breeze FL
