Window problem
Thread Starter
5th Gear
Joined: Jun 2008
Posts: 5
Likes: 0
Window problem
I had a problem with my door locks. My window was working fine before starting everything. I replaced 3 relays on my dcm to attempt to fix my door problem but that didn't work. So I replaced the actuator inside the door and that fixed my locking problem but now my window will not go up or down. There is a clicking noise from the dcm whenever I press the up or down button on either driver or passenger door. There were 2 connections on the door actuator. One I think was for the lock and the other for the horn alarm. So I don't think this has anything to do with the window. I have checked the 5 fuses in the floorboard that say something about doors and they are fine. I have checked my connections and they seem fine. I think but not sure that after I replaced the 3 relays on dcm that the window was working. Could one of the plugs on the actuator have something to do with the window?? I am posting a pic of my dcm and it is slightly different than the previous ones posted. If it is another relay does anyone know which one it is. Thanks for the help
Sorry thought I could attach or insert a pic but didn't see how to do that but if you have some thoughts I could email you a pic of the board. thanks, again
Sorry thought I could attach or insert a pic but didn't see how to do that but if you have some thoughts I could email you a pic of the board. thanks, again
