I love it!!!!!!
Zaino'd MY Vert
Racer
Joined: Nov 2008
Posts: 378
Likes: 0
Zaino is the best. Your car looks great!!! 
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,123
Likes: 2
From: Humble TX
St. Jude Donor '09-'10-'11-'12
Thanks all for the kind words 
The trick is to keep buying more cabinets 
I've found there is no alternative to polishing the barrels of the CCWs with a little Mother's Aluminum Polish I have both a regular and a Mini.
I have a little experiment going on with a buddy. He just clay-barred and buffed his C6 and is going to apply Rejex. We're going to compare in six months. However I plan on cheating and will have at least ten more coats of Z2 applied by then I've used the Rejex on the CCWs and so far I'm happy with results, however I'm gonna pick up some Zoop sp? and see how I like that.
Bring her on over, I work in trade for a box of Acid Kuba Kuba's
Well....... I would say day one was clay-barring and buffing out the paint with ZPC. figure maybe six hours, I work slow. Day two - three coats of Z2 with flash accelerator added approx. four hours. Day three spent about two hours with the Z5, two coats. Finally day four, spent another two hours with the Z5 and finishing with Z8. Understand, I was in no hurry and was just enjoying the time. Fourteen hours.
I plan on doing just that. I'll probably skip the accelerator and just apply one coat at a time and simply allow the cure time unless I plan on applying two or three coats at a time.
I've found there is no alternative to polishing the barrels of the CCWs with a little Mother's Aluminum Polish
I have both a regular and a Mini. I've used the Rejex on the CCWs and so far I'm happy with results, however I'm gonna pick up some Zoop sp? and see how I like that. Bring her on over, I work in trade for a box of Acid Kuba Kuba's
Zaino is the best. Your car looks great!!!
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Race Director
Joined: Jan 2007
Posts: 18,643
Likes: 14
From: Norman Oklahoma - The Only State in the Union with no Blue Counties!
Zaino is the best. Your car looks great!!!
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
Now that you started with a clean base, just use Z2 with the flash cure accelerator so you can layer it faster and don't have to let it cure it between coats. When you build up the layers, look out!!! Looks like you can dive right into the paint. The more layers, the deeper the shine.
I only have 23 coats of Z2 and Z5 on mine. Kinda shines even at the track.
Good stuff!
Thread Starter
Melting Slicks
Joined: Aug 2007
Posts: 2,123
Likes: 2
From: Humble TX
St. Jude Donor '09-'10-'11-'12
Very nice
Team Owner
Joined: Aug 2003
Posts: 24,987
Likes: 26
From: Kerrville, Texas USA Hook 'em Horns!
CentralTX Events Coordinator
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17
Looks great.
I haven't seen a yellow vert with 505As before. Very nice combo.
I haven't seen a yellow vert with 505As before. Very nice combo.
