[Z06] Monster clutch level 5 install!!!!!!!!
Thread Starter
Racer
Joined: Apr 1999
Posts: 370
Likes: 1
From: Taylors sc
Monster clutch level 5 install!!!!!!!!
Hi All!!
Just finished with a Level 5 Monster and i am to say the least very impressed and ecstatic about the initial drive in the Z06....I have driven many cars with PUCK style clutches and i hated them.. But there is something goin on right with this set-up.. And i like it...
The pedal pressure feels almost as stock as it can be..My Daughter (105 lbs.)drove this car and said that it was easier than her Z28!!!!
The Test drive showed very VERY SLIGHT chatter and was almost undetected with the right RPM,s and clutch release.. No jerking,no jumping My wife could drive it very easily!!!!!
People have asked for some test results and they will be coming on this one next week.. Beach trip planned for the weekend... That should get some city driving and some miles on it 600-700 by Tuesday!!!!
Some pics of the install for you to check out... Mike Yeager@ EastCoast Performance (1-864-404-1776) handled all the Questions the customer had and did a GREAT JOB working with Him.. Clutch was recieved in A fast manner and installed as quickly... IM SOLD on the MONSTER!!!!!! Thanks also to MONSTER for Manufacturing a Great Product... Next Test DRAGSTRIP!!!!!!
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Thanks Guys for taking a peek!!!!!!
Just finished with a Level 5 Monster and i am to say the least very impressed and ecstatic about the initial drive in the Z06....I have driven many cars with PUCK style clutches and i hated them.. But there is something goin on right with this set-up.. And i like it...
The pedal pressure feels almost as stock as it can be..My Daughter (105 lbs.)drove this car and said that it was easier than her Z28!!!!
The Test drive showed very VERY SLIGHT chatter and was almost undetected with the right RPM,s and clutch release.. No jerking,no jumping My wife could drive it very easily!!!!!
People have asked for some test results and they will be coming on this one next week.. Beach trip planned for the weekend... That should get some city driving and some miles on it 600-700 by Tuesday!!!!Some pics of the install for you to check out... Mike Yeager@ EastCoast Performance (1-864-404-1776) handled all the Questions the customer had and did a GREAT JOB working with Him.. Clutch was recieved in A fast manner and installed as quickly... IM SOLD on the MONSTER!!!!!! Thanks also to MONSTER for Manufacturing a Great Product... Next Test DRAGSTRIP!!!!!!
[IMG]
[/IMG][IMG]
[/IMG][IMG][/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]Thanks Guys for taking a peek!!!!!!
Thread Starter
Racer
Joined: Apr 1999
Posts: 370
Likes: 1
From: Taylors sc
Fluid Evac!
Hello knyght,
The fluid evac is what we use to pull the fluid thru the system...They cost less than 75 bucks and do a great job of pulling fluids out.... You can also use the speed bleeder as it has a check ball in side to do it with one person.. Just make sure you pump it slow and have the hose in a container where fluid cant get out...
On a new hydraulic system you can open the bleeder and submerge the bleeder under the fluid and thus no air can enter that way either...
Remember theirs only 2 sides to milk a cow from... The tail side will not be fun!!!!
The fluid evac is what we use to pull the fluid thru the system...They cost less than 75 bucks and do a great job of pulling fluids out.... You can also use the speed bleeder as it has a check ball in side to do it with one person.. Just make sure you pump it slow and have the hose in a container where fluid cant get out...
On a new hydraulic system you can open the bleeder and submerge the bleeder under the fluid and thus no air can enter that way either...
Remember theirs only 2 sides to milk a cow from... The tail side will not be fun!!!!
Drifting
Joined: Feb 2006
Posts: 1,420
Likes: 0
From: Boston MA
Hello knyght,
The fluid evac is what we use to pull the fluid thru the system...They cost less than 75 bucks and do a great job of pulling fluids out.... You can also use the speed bleeder as it has a check ball in side to do it with one person.. Just make sure you pump it slow and have the hose in a container where fluid cant get out...
On a new hydraulic system you can open the bleeder and submerge the bleeder under the fluid and thus no air can enter that way either...
Remember theirs only 2 sides to milk a cow from... The tail side will not be fun!!!!
The fluid evac is what we use to pull the fluid thru the system...They cost less than 75 bucks and do a great job of pulling fluids out.... You can also use the speed bleeder as it has a check ball in side to do it with one person.. Just make sure you pump it slow and have the hose in a container where fluid cant get out...
On a new hydraulic system you can open the bleeder and submerge the bleeder under the fluid and thus no air can enter that way either...
Remember theirs only 2 sides to milk a cow from... The tail side will not be fun!!!!
Noted.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Apr 1999
Posts: 370
Likes: 1
From: Taylors sc
Well Keep ya Posted!!
