.jpg)
My New Interior
Thread Starter
Advanced
Joined: Feb 2004
Posts: 92
Likes: 0
From: Wayne New Jersey
They aren't to bad to put in.
It takes longer to take apart and reinstall the dash then to actually mount the trim rings.
Just make sure everything is clean when you get the cluster on your workbench and be careful with the cement (it can get on everything).
Also make sure you use enough cement as I have heard of others having a problem with these things falling off.
Mine have been on for a few years now with no problems.
It takes longer to take apart and reinstall the dash then to actually mount the trim rings.
Just make sure everything is clean when you get the cluster on your workbench and be careful with the cement (it can get on everything).
Also make sure you use enough cement as I have heard of others having a problem with these things falling off.
Mine have been on for a few years now with no problems.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
