Help!!!
Thread Starter
Instructor
Joined: Aug 2009
Posts: 243
Likes: 26
From: Virginia Beach
Help!!!
In need of help guys.....
So I got my mail order tune from ECS and made a huge rookie error. I did not realize that I needed to remove my front passenger wheel in order to access the PCM. I'm currently at college in San Antonio, Texas and about 5 hours away from my jack which is at my home in Dallas. I would appreciate any advice or recommendations on places to go in the San Antonio area that would offer a fair/small fee to simply swap my PCM's and fix the "case learn" issue caused by installing a new PCM into my vette. Thank you in advance for your help!
So I got my mail order tune from ECS and made a huge rookie error. I did not realize that I needed to remove my front passenger wheel in order to access the PCM. I'm currently at college in San Antonio, Texas and about 5 hours away from my jack which is at my home in Dallas. I would appreciate any advice or recommendations on places to go in the San Antonio area that would offer a fair/small fee to simply swap my PCM's and fix the "case learn" issue caused by installing a new PCM into my vette. Thank you in advance for your help!
Team Owner
Joined: May 1999
Posts: 22,830
Likes: 13
From: Columbus Ohio
CI 3-4, 8-9-10 Veteran
St. Jude Donor '06-'08-'10
Race Director
Joined: Jul 2007
Posts: 18,681
Likes: 47
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Just go to your local parts house and I bet you can get a cheap jack for 20 bucks or so, Also why would you have to do a case learn?
When I installed my pcm I didn't have to, It was plug and play and I do mean play...lol.
I used a pcm from eBay I bought and had it programed and still have my stock one.
When I installed my pcm I didn't have to, It was plug and play and I do mean play...lol.
I used a pcm from eBay I bought and had it programed and still have my stock one.
Thread Starter
Instructor
Joined: Aug 2009
Posts: 243
Likes: 26
From: Virginia Beach
ECS said since I'm installing a new PCM rather than updating my stock that I have to have a tuner do a "case learn" on it... since I have to do this I was going to try to get the swap and all done at once. I was hoping someone knew someone in the area who could hook me up for cheap 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
7 Bolt-On Upgrades From Extreme Online Store to Level Up Your C6 Corvette
Pouria Savadkouei
Safety Car
Joined: Oct 2003
Posts: 3,854
Likes: 8
From: Pearland, TX
Cruise-In VIII Veteran
St. Jude Donor '03 thru '20
You could also call they guys at Lethal Performance. I was over there a few weeks ago and they seemed like they're good folks. I'd bet that they'd be willing to help.