When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After I finished the wiring ,This is what I did with all the wiring ( 60 wires to be exact), trying to keep them neat and I used a Black ribbed plastic wire/hose cover (a too cheap mod) will change out when I feel like or the hubby can do it himself I zipped tied to the hinges that were secured and doesn't move to pinch the wiring
I didnt have to extend my wires, so I just used some wire loom. I dont have any pics, just look above.
I understand, the kit I have made by Dream Car Custom doesn't require extending the wires either.
But I do have to extend the rubber door boot somehow to allow for the larger area between the door and the fender as well as the longer lift of the door.
This is the boot I'm talking about;
I was thinking about fitting two of these stock boots together somehow to allow the bigger wire span but before I "recreate the wheel" so to speak, I was hoping to get some ideas/pics from current Lambo door owners and what they did?