When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking forward to the results! Get some 315/30/18 M/T's... I'm at 18psi+ and they hold pretty good! With the kind of power we're making though, throttle modulation is the key.
numbers coming soon. 7# blows the tires off in 3rd. 14 was ridiculous to keep in a straight line. 16 was like going down the freeway blindfolded, throwing out the steering wheel, then mashing the gas while crossing over an oil slick.
The 315's would need a minimum of a 11" rim (people have done it on stock Z rims though). They do make a 305/35/18 which would fit the 10.5" stock Z rims.
numbers coming soon. 7# blows the tires off in 3rd. 14 was ridiculous to keep in a straight line. 16 was like going down the freeway blindfolded, throwing out the steering wheel, then mashing the gas while crossing over an oil slick.
Need to use the load side so I can hit a few more cells that I cant get on the street. Will probably get with EG next week when Stephen has a little time
Need to use the load side so I can hit a few more cells that I cant get on the street. Will probably get with EG next week when Stephen has a little time
Mine goes in the 14th , at 10... I should make about half of what you make.:o