A.I.R. System Question
Thread Starter
Advanced
Joined: Sep 2008
Posts: 55
Likes: 0
From: Gulfport MS
A.I.R. System Question
Sorry guys as this may have been discussed a million times...
I have a 2003 Z06, and I threw the code P0410, so I popped open the hose next to the alternator to see if air was coming out when I cranked the car up. Well, not much air was coming out, and being in Mississippi I am not worried about emissions. I read that you can completely remove this system, and I was looking for a step-by-step on how to do so. Also, what caps do I buy to put on the end of each open end? Thanks for any help guys!
I have a 2003 Z06, and I threw the code P0410, so I popped open the hose next to the alternator to see if air was coming out when I cranked the car up. Well, not much air was coming out, and being in Mississippi I am not worried about emissions. I read that you can completely remove this system, and I was looking for a step-by-step on how to do so. Also, what caps do I buy to put on the end of each open end? Thanks for any help guys!
Drifting
Joined: Mar 2006
Posts: 1,872
Likes: 7
From: Richmond VA
Just remove the whole thing! It will make plug changes a breeze! The only difficult part is reaching the bolt on the back of the driver's side head next to the firewall. I got to it without having to remove the intake. I disconnected the brake booster rubber hose and the braided stainless fuel like for better access. Look at the pics on page 2 of the below link where Bill posted some excellent pictures.
http://forums.corvetteforum.com/c5-t...-system-2.html
http://forums.corvetteforum.com/c5-t...-system-2.html
