[Z06] How do you remove the passenger seat?
I saw several bolts that look like they are secured with locknuts at the rear base of the seat, but there are no threads on them, so that worries me. Can someone tell me how to remove the seat so I can clean the floorboard and the carpet underneath? TIA


:smash:





Here are the instructions from the manual -
Protect the interior and/or provide access for seat removal as follows:
Tilt the steering wheel full up.
Remove the coupe's roof lift off panel to provide additional space for seat removal and/or place a protective cover over the sill plate and door trim panel.
Lower the convertible's folding top to provide additional space for seat removal and/or place a protective cover over the sill plate and door trim panel.
Place a protective cover over the hardtop's sill plate and door trim panel.
Position the seat rearward.
Remove the push pins and covers from the front of the adjuster legs.
Remove the nuts from the front of the adjuster legs.
Remove the nuts attaching the rear adjuster legs.
Remove the seat and/or the adjuster(s).
And here is a link to the online service manual page:
http://si2kam20:am201100@service.gm....Model=Corvette
best regards -
mqqn
Thanks again for the replies. :D












