VA Speed World Class Facility
Thread Starter
Late Model Domestics
Joined: Oct 2007
Posts: 1,548
Likes: 46
From: Virginia Beach VA
VA Speed World Class Facility
Today was VA speeds open house.
I will not brag and say what a world class facility they are because actions speak louder than words in my world.
There crew is the best around and you couldn't place a better group of people together.
The Cohesion in the work shop shows with the work they put out on the street.
I love my Tuners!!!!!!!!!!!!!!
I figured I post and stay what a great time I had and thanks for the grub.
If you haven't been to VA speed you would be quite impressed with their facility. The cleanliness alone shows they run a tight ship.
Doug, Shawn, Ed, Brian, George, Shannon and Susan where all on hand to field all questions and demo their engine and install capabilities.
They also strapped a few cars down for free, one of them being mine and ED did a retune right there under the gun in front of the crowd and my Z put down 430 RWHP - 400 RWTQ not bad for a open house.
Now thats TUNING!
I am having them install the TFS 215's I just bought so Ill let you know what Ed gets out of them.
Here is my Dyno Run:
And Valli Vette burning some rubber(private grounds)
And to the Mustang guy that left from Ohio your plate fell off and I put it in the shop for you!!
Mario
I will not brag and say what a world class facility they are because actions speak louder than words in my world.
There crew is the best around and you couldn't place a better group of people together.
The Cohesion in the work shop shows with the work they put out on the street.
I love my Tuners!!!!!!!!!!!!!!
I figured I post and stay what a great time I had and thanks for the grub.
If you haven't been to VA speed you would be quite impressed with their facility. The cleanliness alone shows they run a tight ship.
Doug, Shawn, Ed, Brian, George, Shannon and Susan where all on hand to field all questions and demo their engine and install capabilities.
They also strapped a few cars down for free, one of them being mine and ED did a retune right there under the gun in front of the crowd and my Z put down 430 RWHP - 400 RWTQ not bad for a open house.
Now thats TUNING!
I am having them install the TFS 215's I just bought so Ill let you know what Ed gets out of them.
Here is my Dyno Run:
And Valli Vette burning some rubber(private grounds)
And to the Mustang guy that left from Ohio your plate fell off and I put it in the shop for you!!
Mario
Racer
Joined: Dec 2009
Posts: 304
Likes: 0
def had a great time at va speed also. Cant wait to get some work dont there when i get back from some training. Damn car wanted to stick and not burn out to much there in the parking lot. Mario that video def doesnt do your car justice. Cant wait to hear it once you get the new heads put on.
Le Mans Master
Joined: May 2007
Posts: 5,383
Likes: 6
From: hagerstown md
St. Jude Donor '08-'09
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Race Director
Joined: Dec 2004
Posts: 13,760
Likes: 75
From: Haymarket VA
Thread Starter
Late Model Domestics
Joined: Oct 2007
Posts: 1,548
Likes: 46
From: Virginia Beach VA
Middle of May I hope!
Will be TFS 215 milled to 59cc or whatever Shawn mills them too, Harland Sharp 1.7 RR, Caddy Racing or lS7 lifters, Cometic gaskets.
My car is making 430's RWHP and 400's RWTQ with their cam and Fast 102 mm, and other bolt ons.
I hope to be 480 435 after the heads. The more the... well you know Mr. 427, that's my dream engine!!
Mario
Will be TFS 215 milled to 59cc or whatever Shawn mills them too, Harland Sharp 1.7 RR, Caddy Racing or lS7 lifters, Cometic gaskets.
My car is making 430's RWHP and 400's RWTQ with their cam and Fast 102 mm, and other bolt ons.
I hope to be 480 435 after the heads. The more the... well you know Mr. 427, that's my dream engine!!
Mario
