BLING.... Engine Part Overload - Pictures
Thread Starter
Banned Scam/Spammer
Joined: May 2007
Posts: 15,685
Likes: 1,330
From: Machineguns, because I don’t compromise
BLING.... Engine Part Overload - Pictures
I did some work for a friend (97c5vette), so I've got a pair of Weiand/Lingenfelter Signature intakes (kinda rare especially in the future) and some various stuff. I didn't feel like pulling everything out of the garage but here's some eye candy.. as best that a cheap 3g iphone camera can capture..
Also, the stuff on the left is about one year old, so you can see there isn't much upkeep to keep in similar shape to brand new stuff.
Fuel rail for a '97-'98
Here's one of the belt tensioners/thermostats and a water pump...
Oxidation test...( 1 year apart) the left one is maybe a 9 and the right is a 10
One of the cylinder heads strikin' a pose.
Here you can see the John Lingenfelter signature (series) inscription
Quick mock-up in a [still] cruddy engine bay.....
The front cradle, steering rack, ebcm and bracket, brake lines, EVERYTHING is getting attention before it's over.
Also, the stuff on the left is about one year old, so you can see there isn't much upkeep to keep in similar shape to brand new stuff.
Fuel rail for a '97-'98
Here's one of the belt tensioners/thermostats and a water pump...
Oxidation test...( 1 year apart) the left one is maybe a 9 and the right is a 10
One of the cylinder heads strikin' a pose.
Here you can see the John Lingenfelter signature (series) inscription
Quick mock-up in a [still] cruddy engine bay.....
The front cradle, steering rack, ebcm and bracket, brake lines, EVERYTHING is getting attention before it's over.
Last edited by ~Josh; Jul 20, 2010 at 11:18 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: May 2004
Posts: 4,628
Likes: 397
From: Madison Wi
I've always wanted to see what it would look like to have a 100% stock appearing engine bay with the exception of the 6 pieces that are exposed aluminum being polished.
1) brake master cylinder
2) alt
3) alt bracket
4) waterpump
5) tensioner pulley
6) throttle body
1) brake master cylinder
2) alt
3) alt bracket
4) waterpump
5) tensioner pulley
6) throttle body
Thread Starter
Banned Scam/Spammer
Joined: May 2007
Posts: 15,685
Likes: 1,330
From: Machineguns, because I don’t compromise
How about a 100% polished engine sitting there like nothing is connected to it? If you're going to be rediculous, might as well be crazy rediculous is my motto.
I can't wait to have it all together with a polished A&A supercharger stuffed on top.
Safety Car
Joined: May 2004
Posts: 4,628
Likes: 397
From: Madison Wi
Your daydreams are slacking..... why not have every nut and bolt and have the coils relocated, wires minimized/hidden?
How about a 100% polished engine sitting there like nothing is connected to it? If you're going to be rediculous, might as well be crazy rediculous is my motto. I can't wait to have it all together with a polished A&A supercharger stuffed on top.
How about a 100% polished engine sitting there like nothing is connected to it? If you're going to be rediculous, might as well be crazy rediculous is my motto.
I can't wait to have it all together with a polished A&A supercharger stuffed on top.You are an over achiever!
Administrator
Joined: Mar 2001
Posts: 368,390
Likes: 24,793
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Damn that stuff looks awesome. Would love to have at a minimum a fuel rail that looks that good.