[Z06] what to do first?
Thread Starter
7th Gear
Joined: Jul 2010
Posts: 7
Likes: 0
From: Meridian, Idaho
what to do first?
Hi, my name is scott. about 4 months ago i recently bought a 01 zo6. It has lg headers, blackwing, and tune. the car runs great, no probs at all. Im going to take the classes at willow springs soon. I would like to keep the motor, clutch, and driveline stock for now..to have more seat time. What classes can i go in? its a 80% daily driver. what are the first things to ugrade? brake cooling ducts, roll bar, harness, tires, what? Can anyone give me some tips where to start?
Last edited by local 80 grip; Jul 23, 2010 at 02:05 AM.
Intermediate
Joined: Jun 2010
Posts: 29
Likes: 0
I am a noob here but spent 5 years at Willow racing bikes and watching cars.
The weakest link on most street cars were always the brakes. I don't know if steel braided lines are required at this time but at least some fresh brake fluid and pads with decent life. Newer tires are good too.
The weakest link on most street cars were always the brakes. I don't know if steel braided lines are required at this time but at least some fresh brake fluid and pads with decent life. Newer tires are good too.
Intermediate
Joined: Jun 2010
Posts: 29
Likes: 0
I found this thread below and it is full of good information. Some racer don't even use the expensive rotors. They say the centrics work well and are $50 a pop.
He covers the cooling ducts too.
http://forums.corvetteforum.com/auto...e-learned.html
Good luck out there and have fun.
He covers the cooling ducts too.
http://forums.corvetteforum.com/auto...e-learned.html
Good luck out there and have fun.
