When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys Im mailing my bezel off to dennis tomorrow but I figured I would go ahead and do some of the prep work. How do I get the old radio cage out somthing about using a dremel to cut it with sparks flying everywhere that bothers me lol how did yal get yours out
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
I believe all you have to do is remove the bottom support the radio sits on, Use tin snips and cut it out, Just do it neatly.
This picture shows both the radio and hvac supports removed, You only need to remove the top one.
Go to the Audio Forum and you'll find a Sticky, which includes some good instructions regarding the process. Also, keep Dennis' phone number close by. I have had to contact him a number of times for follow up questions and he has always been very gracious and generous of his time.....especially when I'm asking some pretty basic questions.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.