When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Driver side is making a creaking crunching sound when going up and down, I took door panel off and it's quiet when going up and down,Tracks and cables look fine when I put the door panel back on it makes the creaking crunching grinding sound,and a small section of felt is bit worn on the top of the door panel where it slips into the groove it sits in.any ideas?
The steel cable inside probably has a broken wire on it, therefore scraping. I would suggest a new window regulator...probably about $200
that makes sense, probably why the window gets stuck about half way down as it's making the noise, so maybe it's a peice of frayed cable, i will have to look into some more...thanks
The steel cable winds around the center of the regulator/motor assembly and essentially a large loop. There is really little you can do to repair it without unwinding this cable and somehow get a new wound back in there exactly the same.