About2Bite

**Added photos**

I have an exhaust system I just took off and am going to sell here soon. I was told by the previous owner it was aftermarket, actually Flowmaster, but it has no brand etchings anywhere on it. The system goes from the stock manifolds back. It's pretty loud and sounds good but I have no idea who makes it for sure. Anyone one here experience this?

It has cats and mufflers, looks to be stainless. I'll try to get some photos as soon as I can. Any idea what a reasonable price would be for this? I think I'm going to throw it on Craigslist and see what happens.

Thanks

Finally took some pictures:











































Here is a vid of it.

jacks996

you need to post some pics of it on here. You cant even see the exhaust in the video

coanan

I'll take them for 200.00

About2Bite

Ok, I'll try to get some pics up when I can, it's at my buddies shop so tomorrow I should have them.

I really don't want to try to ship this system Coanan, but I appreciate the interest. If nothing happens I'll send you a PM

Thanks

Josh

coanan

If it's a four piece system it shouldn't be too bad. What state are you in? My right muffler is starting to fall apart internally.

About2Bite

I'm just outside of Chicago, it's not the shipping charges it's the hassle of shipping something this big, the mid-pipe is huuuge and the mufflers are bulky, and I really would prefer someone to just come to me with a truck and take it away.

Once I find out more about the system I'll have a better idea as to pricing but right now I'm looking for something local man. Like I said though if nothing happens I "may" decide to ship the system and if I do you'll be the first to know.

The system is in Valparaiso Indiana

Thanks again,

Josh

coanan

OK thanks, the big mid pipe with cats and cross-over wouldn't go with the cat-backs (mufflers).

Vetteman Jack

A number of exhaust manufacturers do not have any markings on them to identify the make. Some better pics might help get you an answer.

rootpooty

Im right up the road from you. I could tell you what exhaust you have!

About2Bite

Added pics to 1st post

About2Bite

Thanks, if we can't figure it out on here you're more than welcome to take a look at it

About2Bite

After looking around it looks like they may be Corsa tips? I looked into Flowmaster but they have nothing similar and I hear they don't have stainless exhaust either. Still not too sure what it it

Here is a pic of what I think the tips look like:
http://www.corsaperf.com/product_dis...px?product=224

SoDiezl350

Looks just like my Corsa. The first generation of Corsa catbacks did not have any identification. The mufflers also tended to have poorly welded baffles that would break and cause the baffles to rattle

About2Bite

Ok looks like i'm making some progress, thanks for the info.

It looks like the stock cats and pre-cat piping was welded to the h-pipe or am I mistaking?

Got uid0

Was my first thought..

Looks like Exhaust Extensions, CORSA, "Hot Tips", 1997-2000

Screw on tips

About2Bite

There are no screws in the tips, they're welded on.

Are there any other companies other than Corsa that have made a stainless exhaust system without any labeling?

Mike98SilVert

Early Corsa catback with Classic tips.

About2Bite

Awesome, thanks for the info

About2Bite

Any info on that mid pipe? I don't see any Corsa H-Pipes only looks like they make a X-Pipe.

p1bz

That whole midpipe is stock. They just look funny like that. I assure you.