When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I would like to give as well. I have a stock 2004 tunnel plate, perfect condition. I also believe I have a stock 2004 C5 shifter and a 2004 stock airbox (smaller hole in front than Z06 cover) I will search through my parts bins and see what else I have laying around that I can pass on. All I ask is shipping/packing cost for any of these items. If you are near Richmond Va I can meet you and they are FREE. I will try to get pictures up this week. If you are local I also have several pairs of front and rear Napa rotors(Canada Castings), they have never been turned and at most may need a .001" turn. Can't ship the rotors, not worth it for the buyer. Found shifter and air box lid, all pictures below
Last edited by TrueBlueCoupe; Dec 4, 2011 at 07:38 PM.
Reason: Added Pictures
I would like to give as well. I have a stock 2004 tunnel plate, perfect condition. I also believe I have a stock 2004 C5 shifter and a 2004 stock airbox (smaller hole in front than Z06 cover) I will search through my parts bins and see what else I have laying around that I can pass on. All I ask is shipping/packing cost for any of these items. If you are near Richmond Va I can meet you and they are FREE. I will try to get pictures up this week. If you are local I also have several pairs of front and rear Napa rotors, they have never been turned and at most may need a .001" turn. Can't ship these, not worth it for the buyer.
I, too have some stock front corner lights, that I replaced with clear corners. They were not "cooked", maybe "warmed", but still very usuable. Pay shipping and they are yours.
From: LA/OC border, probably sittin' under the patio, by the pool...smokin' a cigar! SoCal
Side markers gone to TSlick98 If I post 3 separate items, do I get three picks!
Set of corners...passenger side is brand new from a recent front end repair. Shop used all GM parts in repair, except this side marker. (Taiwan made) I pulled them out and put in some clear/black instead. Driver side is OEM, but used. Nothing wrong with either one....
PS....
DS....
Last edited by GBsC5Vert; Dec 4, 2011 at 03:33 PM.
From: LA/OC border, probably sittin' under the patio, by the pool...smokin' a cigar! SoCal
One more item for now. K&N air filter off my 99 'vert. I think I bought this year. Maybe 200 miles. Went back to a paper filter. Nothing wrong with it at all....
Last edited by GBsC5Vert; Dec 4, 2011 at 03:02 PM.
Set of corners...passenger side is brand new from a recent front end repair. Shop used all GM parts in repair, except this side marker. I pulled them out and put in some clear/black instead. Driver side is OEM, but used. Nothing wrong with either one....
From: LA/OC border, probably sittin' under the patio, by the pool...smokin' a cigar! SoCal
Mats gone to OneBlueC5 Llyods mats. Also taken out of my 99 'vert. Swapped to some Lloyd TruBerber mats. Out of boredom, I took a black marker and started to fill in the silver parts of the C5 logo on the mats. You would have to finish with the black to make look more presentable/useable.
Last edited by GBsC5Vert; Dec 4, 2011 at 03:53 PM.
I have some new, still-in-packaging no-name brand tweeters that will go free to a good home. I'll pay shipping as long as it's in the contiguous United States. Pics tonight when I get home (if they're not claimed by then)
Last edited by OneBlueC5; Dec 5, 2011 at 01:20 AM.