Why GM never offered factory chrome wheels?
#1
Melting Slicks
Thread Starter
Why GM never offered factory chrome wheels?
I just finished reading a wheel/tire book on Corvettes and they brought up the fact that GM never offered factory chrome wheels for the Corvette. Now that I think of it and all the Corvette generations I have owned I can not recall any chrome wheels. Even the 2004 C5 Z06 Comm. had polished aluminum wheels ( instead of the Argent Silver) like were an option on my 2001 C5 (at $1200).
The book mentioned something about the chrome plating process weakening the wheels if used for racing or "extreme" driving. They backed it up by saying there are no chrome wheels being used in racing.
I do remember from metallurgy class about "hydrogen embrittlement" but forgot if that was a factor in chrome plating.
On the subject are aftermarket, reproduction wheels are they safe for racing? The book mentioned some are made in small villages in China where quality of materials is poor.
The book mentioned something about the chrome plating process weakening the wheels if used for racing or "extreme" driving. They backed it up by saying there are no chrome wheels being used in racing.
I do remember from metallurgy class about "hydrogen embrittlement" but forgot if that was a factor in chrome plating.
On the subject are aftermarket, reproduction wheels are they safe for racing? The book mentioned some are made in small villages in China where quality of materials is poor.
#3
Pro
Member Since: Mar 2004
Location: Springfield Ohio
Posts: 712
Likes: 0
Received 100 Likes
on
83 Posts
My 04 has chrome, factory wheels. I see a lot of them. As an after thought, I checked the window sticker and they are listed as high polished aluminum. I would have bet money they were chrome! I will say they are holding up better than any other polished wheels I've had.
Last edited by tbrowne; 02-12-2012 at 06:32 PM. Reason: Not chrome after all.
#4
Le Mans Master
#7
I'm "Apache" a psycho dog
I can tell ya im dissapointed as i was careful not to use anything but car soap to clean them. No road salt either.
Last edited by Rob 99; 02-12-2012 at 06:58 PM.
#8
Melting Slicks
Metallurgist here....because the chrome plating process will always produce a coating with cracks along the plating layer. These cracks basically then become part of the base alumium base metal substrate. When high loads ocuur and enough to start fatigue cracks, these "pre-cracks" are great initiation sites for a crack to propagate easily into the metal.
Also some info on how to shine :milky" polished wheels:
http://ls1tech.com/forums/appearance...ine-again.html
Also some info on how to shine :milky" polished wheels:
http://ls1tech.com/forums/appearance...ine-again.html
The following 2 users liked this post by RedC5:
ArmchairArchitect (11-21-2017),
Dads2kconvertible (07-21-2023)
#9
Le Mans Master
GM did do chromed aluminum wheels on some Cadillac and Buick cars/SUVs.
Plus, in 2006 Chevy offered chromed aluminum wheels on the C6 (RPO # QX3).
Plus, in 2006 Chevy offered chromed aluminum wheels on the C6 (RPO # QX3).
Last edited by Oldvetter; 02-12-2012 at 07:30 PM.
#10
Safety Car
#11
Melting Slicks
Thread Starter
I do believe GM offered chrome wheels on non Corvettes because they were never able to be pushed to the limits Corvettes can and are pushed too.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
#12
Melting Slicks
I do believe GM offered chrome wheels on non Corvettes because they were never able to be pushed to the limits Corvettes can and are pushed too.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
#13
Le Mans Master
I do believe GM offered chrome wheels on non Corvettes because they were never able to be pushed to the limits Corvettes can and are pushed too.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
Maybe that book was written before 2006? Are you sure they are chrome plated and not polished aluminum? I would really like to know for sure. Several people think their wheels are GM original chrome only to find out they are polished aluminum so is this the case with the 2006?
As RedC5 said the chrome plating process weakens the wheels.
Furthermore, in 2008 Chrome Aluminum Wheels (RPO # Q76) were an option on the ZO6 ! So much for the theory of not pushing them to the limits.
Last edited by Oldvetter; 02-12-2012 at 08:04 PM.
#15
Melting Slicks
I have the same wheels Hi-polished thin spokes(i believe a $1800 option) in 2004 and unfortunetly the clear has peeled in somes spots, they weren't hi miles either, they are off the car now as i went to aftermarket wheels and am pondering if i should try to polish out the areas and re clear myself or find a place to do a professional repair.
I can tell ya im dissapointed as i was careful not to use anything but car soap to clean them. No road salt either.
I can tell ya im dissapointed as i was careful not to use anything but car soap to clean them. No road salt either.
#16
Team Owner
#17
Le Mans Master
Had my stock Thin Spokes Chrome Plated the first day I bought the car new in 9/2000. Nearly 12 years later of Daily Driving they still look like new - not a noticeable scratch or visible crack (yet).
As to why GM has never offered chrome wheels on the Corvette, probably because they know how some people are going to drive these cars - a high percentage get driven into the ground pretty quickly using them as race cars (street or track) so it would just be one more thing for them to have to warranty. The average Corvette owner also complains to the Dealership about "everything". I have seen lots of non-chromed thin-spokes develop stress cracks and have to be replaced - so not sure chrome would make much difference. Plenty of manufacturers offer chrome wheels with lifetime structural warranties - never heard of one failing, but my guess it if it did, it would have failed anyway.
Then again they scour the world to locate the cheapest carpet, vinyl, leather and some other materials on these, so it might be just economics?
These have looked like new for nearly 12 years through rain and snow:
As to why GM has never offered chrome wheels on the Corvette, probably because they know how some people are going to drive these cars - a high percentage get driven into the ground pretty quickly using them as race cars (street or track) so it would just be one more thing for them to have to warranty. The average Corvette owner also complains to the Dealership about "everything". I have seen lots of non-chromed thin-spokes develop stress cracks and have to be replaced - so not sure chrome would make much difference. Plenty of manufacturers offer chrome wheels with lifetime structural warranties - never heard of one failing, but my guess it if it did, it would have failed anyway.
Then again they scour the world to locate the cheapest carpet, vinyl, leather and some other materials on these, so it might be just economics?
These have looked like new for nearly 12 years through rain and snow:
The following users liked this post:
Amontekong (04-25-2017)
#18
Pro
#19
Melting Slicks
most of the time, aftermarket wheels are heavier than oem wheels, which will hurt your acceleration. Before you buy them, make sure to check the weight, especially if they are chromed. Keep in mind, some of the lightest wheels you can get for the car ar the oem speedline or alcoa zo6 wheels. The optional magnesium wheels are also another good option. Most of the time at the autox or the road course, you will see c5's with the oem z06 wheels.
The following 2 users liked this post by SaberD:
ArmchairArchitect (11-21-2017),
El original (11-22-2017)
#20
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,020
Received 19,307 Likes
on
13,978 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I don't think I would use reproduction wheels for racing activities. But that may just be me. If I were going to go racing, I'd want wheels designed specifically for that purpose.