When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wondering where do you put your front license plate, Nev. must not require it. Looks good Bill. In Wisc. a front plate is required however most law enforcment ignores it.
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by Hauln1203
Just wondering where do you put your front license plate, Nev. must not require it. Looks good Bill. In Wisc. a front plate is required however most law enforcment ignores it.
In Nevada a front plate is required, Have never been stopped for it.
I have never been stopped for it myself, have heard of a few overzealous state troopers in our fine state that use it for an excuse to check out our fine C-5s.
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by Shirl
Looks good Bill! I just did the same mod in cf. Did you cut the panel behind it yet? If so, how did you do it?
Thanks, Yes I did, I used a 2 inch hole saw in about 6 places and then used a small saw to clean it up, Here is a picture that I used to cut mine out.
Be careful, There is a wiring harness at the bottom of the cutout.
Mr.Bill
Looks good Bill, But I'm just curious as to why people spend so much money on this mod? I did my own for about $30 and the color matches perfect as it's the stock plate filler
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by Blitzkrieg
Looks good Bill, But I'm just curious as to why people spend so much money on this mod? I did my own for about $30 and the color matches perfect as it's the stock plate filler
First off I got a great deal on the Tunnel Plate from a forum vender, I would of never paid to buy one new, Also some are just not DIY people, Plus I still have my filler plate.
Mr.Bill
Thanks, Yes I did, I used a 2 inch hole saw in about 6 places and then used a small saw to clean it up, Here is a picture that I used to cut mine out.
Be careful, There is a wiring harness at the bottom of the cutout.
Mr.Bill
That looks good. You can still put your front plate back on, if need be. Are you getting more dirt in the engine compartment with it opened up in front? (I have an intercooler, so maybe it won't be too bad).
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by Shirl
That looks good. You can still put your front plate back on, if need be. Are you getting more dirt in the engine compartment with it opened up in front? (I have an intercooler, so maybe it won't be too bad).
I haven't put many miles on it yet so I can't answer that, I wouldn't think it would get much more dust than before.
Thanks, Yes I did, I used a 2 inch hole saw in about 6 places and then used a small saw to clean it up, Here is a picture that I used to cut mine out.
Be careful, There is a wiring harness at the bottom of the cutout.
Mr.Bill
Looks great! I appreciate the picture of the hole (that didn't sound right) Looks like I'll be doing this mod soon! Thanks for posting!
Looks great! I appreciate the picture of the hole (that didn't sound right) Looks like I'll be doing this mod soon! Thanks for posting!
Looks great Bill, just wondering if you cut the inserts out beside the fog lights before you installed those inserts. If so did you notice any temps different.
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by trainor
Looks great Bill, just wondering if you cut the inserts out beside the fog lights before you installed those inserts. If so did you notice any temps different.
When I first looked at the picture I could not figure out the two loops were on your vette's roof. Then I saw it was the wheel well flares on the SUV across the street.
I thought they were those fog/or hunting lights! Sorry, my eyes aren't awake yet.
I like your car, and the screens on the front for sure.
Mr. Bill, the mod is great and you really have to look hard to see any difference in color. However, I am disappointed in that photo. I think this is the first time I've seen a photo from you that I might have taken, rather than all those beautiful and dramatic shots you keep gracing your posts with.
Scott
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Originally Posted by scott1094
Mr. Bill, the mod is great and you really have to look hard to see any difference in color. However, I am disappointed in that photo. I think this is the first time I've seen a photo from you that I might have taken, rather than all those beautiful and dramatic shots you keep gracing your posts with.
Scott
LOL, That was a quick photo that I took really fast to post up, I will try to get a better photo or two later today...
Mr.Bill
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.