Just One More BSM Thread!!
Thread Starter
Advanced
Joined: Feb 2012
Posts: 57
Likes: 0
From: Toledo Ohio
Just One More BSM Thread!!
Hello everyone! I have been following the BSM debate with much humor. In fact, over the last few days I've read most of the threads about them. It seems to be about 65% of the forum members here are in favor of taking them off and 35% wanting to keep them or put them on.
I am one C5 owner that likes the look and wants to have them installed on my Torch Red, 1999 Vert
....until I called my Toledo Corvette shop and found they want $230 in labor, $520.96 in parts and $82.50 in materials for a grand total of: $833.46. 
All I can say is....WOW! And, for a mod that 65% don't even want!
I am one C5 owner that likes the look and wants to have them installed on my Torch Red, 1999 Vert
....until I called my Toledo Corvette shop and found they want $230 in labor, $520.96 in parts and $82.50 in materials for a grand total of: $833.46. All I can say is....WOW! And, for a mod that 65% don't even want!
Racer
Joined: Feb 2012
Posts: 357
Likes: 1
From: Dallas TX
Just picked up a set of take offs off of Fleabay about a month ago for 75 bucks shiped, already painted to match my pewter verte and will be cutting them and installing BSM set number 2 just a little shorter than the factory ones very soon, using 3m tape. Teh goal is the three BSM look !! haha
Race Director
Joined: Sep 2011
Posts: 14,672
Likes: 40
From: Prescott Arizona
Just picked up a set of take offs off of Fleabay about a month ago for 75 bucks shiped, already painted to match my pewter verte and will be cutting them and installing BSM set number 2 just a little shorter than the factory ones very soon, using 3m tape. Teh goal is the three BSM look !! haha
Team Owner
Joined: Mar 2004
Posts: 58,500
Likes: 1,825
From: Oklahoma City OK
C6 of Year Finalist (appearance mods) 2019
Did Toledo Corvette have a gun stuck in your ribs when they quoted you those prices? Those are prices someone gives you when they don't want the work.
Thread Starter
Advanced
Joined: Feb 2012
Posts: 57
Likes: 0
From: Toledo Ohio
How hard can it be? 
It has two-sided tape and needs to be lined up, right? However, I do not know how to do it and until I find another outlet for the parts and someone in my area to do the work, I'll have to live without this mod.
Advanced
Joined: Jun 2007
Posts: 75
Likes: 0
From: Winfield Illinois
If I may add my 2 cents worth. I have a 2000 Pewter Coupe with BSM and I think they add a really nice touch. It breaks up the side (Door) from looking like one big sheet of fiberglass.
I'm impressed that you have stats on who likes/dislikes them. The main thing is if it is a look that you like - go for it. The great thing is they are easily removable if you change your mind down the road or sell it to someone that doesn't like them.
I'm impressed that you have stats on who likes/dislikes them. The main thing is if it is a look that you like - go for it. The great thing is they are easily removable if you change your mind down the road or sell it to someone that doesn't like them.
Le Mans Master
Joined: Sep 2006
Posts: 9,595
Likes: 959
From: Palm Harbor not far from Sebring Florida
St. Jude Donor '11
Oldtimer
Keep an eye out on the forum, as this is a common mod for people to remove them. Those are the ones you want to contact as soon as you read the post and see if they will sell them. Also check the Parts for seal section as well as Ebay and Craig's list.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Advanced
Joined: Feb 2012
Posts: 57
Likes: 0
From: Toledo Ohio
Racer
Joined: Jan 2012
Posts: 405
Likes: 0
From: northern ca
St. Jude Donor '14
Or something I've been thinking about, maybe I saw it here first.. removing the shortfender section and leaving the door section, I think I saw it in conjuction with screens for the fender ducts.
Thread Starter
Advanced
Joined: Feb 2012
Posts: 57
Likes: 0
From: Toledo Ohio
Team Owner
Joined: Jan 2009
Posts: 73,568
Likes: 33
From: Somewhere in Mo
St. Jude Donor '09-'10, '14
Drifting
Joined: Apr 2011
Posts: 1,454
Likes: 6
From: Pittsburgh PA
Used is the only way to go but a shop isn't going to go scouring the internet for deals.
BTW, I got a set in Navy Blue that ain't goin back on.
Last edited by fendermender; May 4, 2012 at 05:57 PM.
Administrator
Joined: Mar 2001
Posts: 368,136
Likes: 24,734
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
You can find BSMs for sale here on the forum (used) for a cheap price. May have to be painted, but if you wait long enough chances are you can find some the same color as your car. And if you do find a set and need install instructions (with measurements), send a PM to me and I can get you the info.
Le Mans Master
Joined: May 2005
Posts: 6,366
Likes: 249
From: Fort Lauderdale, Florida
I've got a set of Torch Red BSM's that I removed years ago and wrapped up carefully in case I wanted to reinstall. Well, that isn't happening so contact me if you want them, I'll sell them for a very reasonable price compared to your quote. PM me and be patient. I'm not on everyday but I'll get back to you.