My 2001 Corvette
Mods already done:
Englandgreen Mayhem II cam 234/245 630 lift 113lsa, ls7 lifters, ls2 chain, ati underdriven pulley, lunati gold valvetrain, high volume oil pump, OBX headers, BBK 80mm throttlebody, 5 angle valve job, Spec stage II clutch, Short throw shifter, Dual cone intake, carbon fiber air bridge, Corsa catback, HID xenon lights, MSD coils and wires, custom sounds, Dropped 2" front 2 1/2" rear, Drilled / slotted rotors, Dark *** tint, tune by BSM hawaii
Glad to be a member here and look forward to learning about these cars.

Last edited by Abnmarine; Nov 29, 2012 at 12:38 AM.
I'm new to Corvettes but not cars. It appears that longer bolts were installed in the rear. The front bolts were removed. I'm gonna raise the back an inch and install the front bolts and raise it 1 1/2". Right now the front air dam is 1/4" above the ground when level.
It also has the Z51 suspension.
The Best of Corvette for Corvette Enthusiasts
If you can find out what shocks are on there id appreciate it.
I know you said bilstiens, could be the sports, or the Hd's I believe.






















