98 air bridge question
Thread Starter
Burning Brakes
Joined: Jan 2013
Posts: 1,091
Likes: 1
From: Hercules CA
98 air bridge question
ok so here is my dilema... i currently have an aftermarket intake/ air bridge on my 98 coupe, since its a 98 i needed to drill the airbridge for the IAT to be fitted, by end of the month im doing an Ls2 MAF swap. so that will be the 3pin to 5 pin conversion eliminating the IAT sensors... my question is what do i do with the previous hole with the sensor, can i block it off and if i can how do i go about doing so? anyone else with an earlier model go through this? dont really want to spend on a newer model air bridge when mine is still good... thanks in advance !
Thread Starter
Burning Brakes
Joined: Jan 2013
Posts: 1,091
Likes: 1
From: Hercules CA
I've had the aftermarket bridge on for about 2 years now... Just now changing my MAF to ls2 so I had to drill the air bridge for sensors ...
Safety Car
Joined: Feb 2001
Posts: 3,725
Likes: 53
From: Warrington Pa.
I guess you could fill the hole with a filler sand and paint. Or fill sand and hydro dip in a carbon fiber color of choice. Or sell the old one and buy a new one with no hole.
Thread Starter
Burning Brakes
Joined: Jan 2013
Posts: 1,091
Likes: 1
From: Hercules CA
Some members are telling me that I can get a rubber plug and just plug it... Wanted to see other options ..
