Centennial Cup Wheels 19/20
Thread Starter
Instructor
Joined: Jul 2010
Posts: 236
Likes: 1
From: Odessa Texas
Centennial Cup Wheels 19/20
Is there anyway to make these fit? I have a 2003 Z06 with 2inch flared rear fenders. Is there anyway to make these fit or am I stuck going the 18/19 route?
Night Owl for life
Joined: Nov 2003
Posts: 24,729
Likes: 4,564
From: Bugs Bunny should'a made a left turn here
assuming the sizes are OEM, the fronts will stick out past the fender.
the rears will need a 5/8" spacer to look correct.
otherwise no biggie, you just need the right tire sizes.
the rears will need a 5/8" spacer to look correct.
otherwise no biggie, you just need the right tire sizes.
Night Owl for life
Joined: Nov 2003
Posts: 24,729
Likes: 4,564
From: Bugs Bunny should'a made a left turn here
No you can only make a wheel go "out" not "in".
You could get aftermarket flared front fenders to cover them but that's a big expense.
You could also leave it alone and live with it as some folks do.
You could get aftermarket flared front fenders to cover them but that's a big expense.
You could also leave it alone and live with it as some folks do.
Pro
Joined: Oct 2013
Posts: 626
Likes: 451
From: SoCal
Funny, I was looking to do the same thing. I was looking at iforged aeros but the lip is way too huge with fender flares. Giovanni would you be interested in the wheels on mine? HREs 19x8.5 and 20x12. They are chrome but I currently have them plasti dipped black.
I wasn't going to sell them since no one except those with fender flares could use them. Hit me up if you're interested.
As for stock z06 or zr1 wheels, they will stick out the front about .75" and most use a 1" spacer in the rear.
I wasn't going to sell them since no one except those with fender flares could use them. Hit me up if you're interested.
As for stock z06 or zr1 wheels, they will stick out the front about .75" and most use a 1" spacer in the rear.
Thread Starter
Instructor
Joined: Jul 2010
Posts: 236
Likes: 1
From: Odessa Texas
yea i might be interested, pm for details on what your asking. Also I was looking at the chrome cray hawks. I know the 19x9 will fit in the front no problem but how about the 20x12.5? How will those fit in the rear?
