When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Originally Posted by Patches
I just need the part number for the fuel block to order it and yes, I'll take another case - just let me know what the shipping is for it. In fact, I'll pay for two of them.
We need you to measure across the bolts on the fuel sending unit on the left tank to give you the proper part number unfortunately. It will either be 3.5" or 3.75" depending on when it was manufactured, but we have not seen a set manufacture date for a cut off. We have seen them mixed in your model year.
No problem on the cases, I'll set a couple a side for you. If we do not have any now, I'll save the next couple for you. We usually give them to whoever asks so I don't know what we have available.
We need you to measure across the bolts on the fuel sending unit on the left tank to give you the proper part number unfortunately. It will either be 3.5" or 3.75" depending on when it was manufactured, but we have not seen a set manufacture date for a cut off. We have seen them mixed in your model year.
No problem on the cases, I'll set a couple a side for you. If we do not have any now, I'll save the next couple for you. We usually give them to whoever asks so I don't know what we have available.
I measured it for Chris a couple of days ago and it was close to the 3.75" dimension. I emailed him that and to go ahead and add the shipping in for the cases just now.
Oh I don't feel bad at all... Thanks for the clarification regarding Flywheel... At any rate It is a very nice kit. I chose to use the wooden crate for .223 ammo, 30 rnd mags, etc....
The flywheel is actually Billet steel.
Dont feel bad about the wood case for the single, I had a customer ask for any extra's we had of them and he made a wine bottle rack out of them and put them in his dinning room. When I first heard that I kind of scratched my head thinking "who would want clutch cases in their dining room?" but it actually looked very nice when he was done. [/QUOTE]
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Originally Posted by Patches
I measured it for Chris a couple of days ago and it was close to the 3.75" dimension. I emailed him that and to go ahead and add the shipping in for the cases just now.