When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How do I change the front turn signal bulb on my 2003?
Remove the access panel under the front, or crank the headlight up and reach down, or push the brake duct aside and reach in. If you have big hands or arms the access panel is best.
Remove the access panel under the front, or crank the headlight up and reach down, or push the brake duct aside and reach in. If you have big hands or arms the access panel is best.
My hands are too big for the brake duct, also tried the head light,
hands did not fit so at noon ran to my chevrolet dealer with
bulds from advance auto parts and for $50 they changed both of them.
In and out in 45 minutes with no appointment, it was worth it. Thanks
for the info anyway
My hands are too big for the brake duct, also tried the head light,
hands did not fit so at noon ran to my chevrolet dealer with
bulds from advance auto parts and for $50 they changed both of them.
In and out in 45 minutes with no appointment, it was worth it. Thanks
for the info anyway
WOW! You must have some big hands!!! I do mine through the brake duct and takes less than ten minutes.
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Originally Posted by Bill Vett
Remove the access panel under the front, or crank the headlight up and reach down, or push the brake duct aside and reach in. If you have big hands or arms the access panel is best.
I've always just removed the access panel under the front fascia.