Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

So my ebay exhaust arrived...

Thread Tools
 
Search this Thread
 
Old 07-06-2014, 07:21 PM
  #41  
madmatt9471
Team Owner
Support Corvetteforum!
 
madmatt9471's Avatar
 
Member Since: May 2006
Location: Palmdale, Ca----- 2009 Cyber Gray 4LT A6 F55 452 RWHP 422 RWTQ- RIP 1998 C5 734 RWHP & 585 RWTQ-----
Posts: 21,458
Received 341 Likes on 281 Posts

Default

Soundclips I'm in for - !

Thanks,Matt
Old 07-07-2014, 12:29 AM
  #42  
Toque
Tech Contributor
 
Toque's Avatar
 
Member Since: Jan 2004
Location: Wylie TX --> Less is More, except under the hood !
Posts: 20,003
Received 179 Likes on 99 Posts

Default

Great to meet you tonight John !

Good luck with the exhaust install !

I can't wait to hear it in person once you get it installed !



Toque
Old 07-07-2014, 11:01 AM
  #43  
ToplessVetteAt42
Racer
 
ToplessVetteAt42's Avatar
 
Member Since: Feb 2014
Location: Jackson Twp, Stark County Ohio
Posts: 284
Received 1 Like on 1 Post
Default

Originally Posted by williame3590
Corsa exhaust systems are not made in China boys.

Bill
No they are not. They are made in Berea, Ohio.
Old 07-08-2014, 01:46 AM
  #44  
slicknick426
Intermediate
 
slicknick426's Avatar
 
Member Since: Jun 2012
Location: florida
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

i wanna hear it
Old 07-08-2014, 03:17 AM
  #45  
beboggled
Racer
 
beboggled's Avatar
 
Member Since: Jan 2012
Location: Bridgewater NJ
Posts: 482
Received 47 Likes on 40 Posts

Default

This thread has way too many people talking. I just wanted to hear OP's opinion and review on the exhaust he bought.

I'm not interested in everyone's opinion of American vs Chinese products. I want to know how OP feels about his exhaust, not how everyone else feels about where it was made. Why is it that every new thread on here eventually becomes a patriotic debate?
The following users liked this post:
David Shiel (02-09-2017)
Old 07-08-2014, 04:09 PM
  #46  
tbrent
Melting Slicks
Support Corvetteforum!
 
tbrent's Avatar
 
Member Since: Mar 2007
Location: KcMo.
Posts: 3,431
Received 65 Likes on 51 Posts
2018 C5 of Year Winner

Default

Originally Posted by beboggled
This thread has way too many people talking. I just wanted to hear OP's opinion and review on the exhaust he bought.

I'm not interested in everyone's opinion of American vs Chinese products. I want to know how OP feels about his exhaust, not how everyone else feels about where it was made. Why is it that every new thread on here eventually becomes a patriotic debate?
It's a forum.
Old 07-08-2014, 04:22 PM
  #47  
jcsperson
Team Owner

 
jcsperson's Avatar
 
Member Since: Dec 2010
Location: Hillsborough NC
Posts: 21,062
Received 745 Likes on 429 Posts
NC Events Coordinator

Default

Originally Posted by Not4spd
So I ordered an exhaust from eBay. The parts store was called epart6060 and the exhaust cost a grand total of $374.99 shipped to my door.
Like a lot of Chinese stuff these days, they look decent. I hope they work out.

I went with used Z06 Ti's that were less expensive and made by GM. Though they aren't the prettiest things you'll ever see, they're the biggest exhaust bargain out there.
Old 07-08-2014, 04:26 PM
  #48  
MotoJB
Le Mans Master
 
MotoJB's Avatar
 
Member Since: Apr 2011
Location: USA
Posts: 5,167
Received 20 Likes on 17 Posts

Default

Originally Posted by tbrent
It's a forum.
...and a forum filled with opinionated nut-jobs at that! LOL
Old 07-08-2014, 06:05 PM
  #49  
tbrent
Melting Slicks
Support Corvetteforum!
 
tbrent's Avatar
 
Member Since: Mar 2007
Location: KcMo.
Posts: 3,431
Received 65 Likes on 51 Posts
2018 C5 of Year Winner

Default

Originally Posted by MotoJB
...and a forum filled with opinionated nut-jobs at that! LOL
No doubt Josh!

I like many can't wait to see/hear the OP's results hopefully they meet the OP's expectations! If they do he may have found a new option for folks looking for exhausts...
Old 07-10-2014, 10:14 AM
  #50  
Narco944
Burning Brakes
 
Narco944's Avatar
 
Member Since: Dec 2013
Location: Atlanta GA
Posts: 916
Likes: 0
Received 3 Likes on 3 Posts
Default

Ready to hear this thing!
Old 07-12-2014, 06:12 PM
  #51  
Not4spd
Melting Slicks
Thread Starter
 
Not4spd's Avatar
 
Member Since: Nov 2008
Location: Garland TX
Posts: 2,185
Received 630 Likes on 394 Posts

Default

Finally was able to secure the lift today. I seriously don't know how you guys do exhaust work in your garage. Install was straightfoward and a breeze. Exhaust sounds just like Borla in person. Overall for $380 it has met my expectations.

I know a bunch of guys on here don't like chinese knockoff parts and/or refuse to put them on your Vette. I on the other hand have no issues if the sound is there and does what it's supposed to.

IMO drone is a minimal and I'm able to carry on a conversation. Then again I haven't ridden in another Vette with exhaust so I can't compare apples to apples. The only issue that I have is the tips are a bit more crooked than my liking. It also appears that the driver side is a bit higher, has a bit more angle, and is tucked a little more than the passenger side. This may requring a bit more finesse and I will continue to play around with it. With that being said the extra money saved will go towards nitrous, blower, or turbo. Just need to do more research and figure out which route I want to take.

It's only been a few months, but the Z06 has been worlds better than the 2005 GTO I came from. Always a blast to drive and looking forward to giving it a pair of *****.

Name:  Z4uTVtf.jpg
Views: 240
Size:  41.9 KB

Name:  pOvpmiw.jpg
Views: 241
Size:  39.9 KB

Name:  sFfVqt3.jpg
Views: 238
Size:  38.9 KB

Name:  n6qUy0I.jpg
Views: 241
Size:  38.6 KB

Name:  aRmVn0E.jpg
Views: 235
Size:  39.1 KB

Name:  Rqa6KQW.jpg
Views: 238
Size:  38.8 KB

Name:  zSnjFOd.jpg
Views: 238
Size:  29.6 KB

Name:  BKV4IRy.jpg
Views: 244
Size:  43.1 KB

Name:  6XIw098.jpg
Views: 239
Size:  40.2 KB

Name:  R3G6TFq.jpg
Views: 243
Size:  34.2 KB

Excuse the crappy cell video:

Last edited by Not4spd; 07-16-2017 at 02:26 AM. Reason: Update on tips
The following users liked this post:
gpruitt54 (02-08-2017)
Old 07-12-2014, 06:46 PM
  #52  
Toque
Tech Contributor
 
Toque's Avatar
 
Member Since: Jan 2004
Location: Wylie TX --> Less is More, except under the hood !
Posts: 20,003
Received 179 Likes on 99 Posts

Default

Sounds great John !
Can't wait to hear them in person tomorrow night at the GTG !

Toque
Old 07-12-2014, 06:55 PM
  #53  
onspeed
Burning Brakes
 
onspeed's Avatar
 
Member Since: Aug 2011
Location: Odessa TX
Posts: 1,071
Received 14 Likes on 13 Posts

Default

Hard to tell on the video what it actually sounds like in person. Do you have a video from the same camera of the stock titanium?
Old 07-12-2014, 07:13 PM
  #54  
Not4spd
Melting Slicks
Thread Starter
 
Not4spd's Avatar
 
Member Since: Nov 2008
Location: Garland TX
Posts: 2,185
Received 630 Likes on 394 Posts

Default

Originally Posted by Toque
Sounds great John !
Can't wait to hear them in person tomorrow night at the GTG !

Toque
Thanks Mark. I'll do my damnest to make it out that way.

Originally Posted by onspeed
Hard to tell on the video what it actually sounds like in person. Do you have a video from the same camera of the stock titanium?
I didn't even think about that. Unfortunetly I do not have a video clip of the stock exhaust. I'll see if I can't come up with an actual camera to get some better footage.
Old 07-12-2014, 07:33 PM
  #55  
chassed
Melting Slicks
 
chassed's Avatar
 
Member Since: May 2009
Location: Rio Rancho New Mexico
Posts: 3,123
Received 281 Likes on 205 Posts

Default

Sorry, but that does NOT sound like a borla.

It doesn't sound great at all. The TI's won that challenge lol
Old 07-12-2014, 07:48 PM
  #56  
Cybermind
Melting Slicks
 
Cybermind's Avatar
 
Member Since: Apr 2009
Posts: 2,479
Received 29 Likes on 23 Posts
Default

Wait a minute! Did you just switch out GM Titanium exhaust for a cheap Chinese knockoff? Originally I thought it was a base exhaust you were switching out. Replacing a TI exhaust for that does not make sense to me! Sorry but, I think you made a mistake.
Old 07-12-2014, 07:57 PM
  #57  
c5chines
Racer
 
c5chines's Avatar
 
Member Since: Apr 2006
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts

Default

Being Chinese made,you'd think the outlets would be squintier... Sounds good.

Get notified of new replies

To So my ebay exhaust arrived...

Old 07-12-2014, 08:08 PM
  #58  
PeterB
Drifting
 
PeterB's Avatar
 
Member Since: Jan 2006
Posts: 1,828
Received 18 Likes on 14 Posts

Default

Old 07-12-2014, 08:42 PM
  #59  
Derf
Burning Brakes
 
Derf's Avatar
 
Member Since: Apr 2001
Location: North\East Wisconsin
Posts: 1,102
Received 8 Likes on 8 Posts

Default

If your selling the TI's, put me first in line.
The following users liked this post:
JimHarris4 (10-19-2020)
Old 07-12-2014, 08:55 PM
  #60  
madmatt9471
Team Owner
Support Corvetteforum!
 
madmatt9471's Avatar
 
Member Since: May 2006
Location: Palmdale, Ca----- 2009 Cyber Gray 4LT A6 F55 452 RWHP 422 RWTQ- RIP 1998 C5 734 RWHP & 585 RWTQ-----
Posts: 21,458
Received 341 Likes on 281 Posts

Default

Sounds good! and looks nice!

Best way to really know if you enjoy the new sound is a nice round trip somewhere with some distance and a little stop and go traffic.

That is how I found out I hated my LG Big 3 mufflers!

Thanks,Matt


Quick Reply: So my ebay exhaust arrived...



All times are GMT -4. The time now is 04:08 AM.