My exact thoughts on the subject................. :yesnod:
[Z06] With or Without Moldings?
Pro
Joined: Jul 2002
Posts: 598
Likes: 0
From: Roscoe IL
Re: With or Without Moldings? (KBlanke)
KBlanke,
How did you get your BSM off? I know there is a posting on how to do this,but it says to use dental floss to "saw" back and forth to get them off. I am worried about the potential for scratching the paint. HOW DO I PERFORM THIS DELICATE SURGERY? :confused:
How did you get your BSM off? I know there is a posting on how to do this,but it says to use dental floss to "saw" back and forth to get them off. I am worried about the potential for scratching the paint. HOW DO I PERFORM THIS DELICATE SURGERY? :confused:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Sep 1999
Posts: 7,810
Likes: 417
From: FL
Re: With or Without Moldings? (gotto41)
Out of 5 C5's, this is the FIRST to not have them................and I like it for the following reasons:
1. When drying off with a leaf blower, water always used to be trapped behind them......
2. When Zainoing, used to have to run my cloth over the top and bottom of the BSM, to get the Zaino off
3. Without them, drying takes less time
4. The car looks much more cleaner, than with them
1. When drying off with a leaf blower, water always used to be trapped behind them......
2. When Zainoing, used to have to run my cloth over the top and bottom of the BSM, to get the Zaino off
3. Without them, drying takes less time
4. The car looks much more cleaner, than with them
Melting Slicks
Joined: Oct 1999
Posts: 2,181
Likes: 421
From: Ponte Vedra Beach FL
Re: With or Without Moldings? (VNAMVET)
Every poll ever taken on this, over the last 3 years, has come out 50-50. In fact, I think I saw that the production totals for 2000 also came out 50-50, or darn close to it. So.......coin flip time!
