C7 Carbon

Hello again! We are excited to announce that we are once more developing a new product for the C5, the Race Edition Front splitter. We have made a digital 3D scan of the C5's front for the most accurate reference as possible. The Front splitter development will take place on cutting edge 3D modeling software and 3D prints. Your feeback will be greatly appreciate it and we'd love to hear any suggestions, help us build that splitter you've been looking for your C5!

We'll be posting updated renders on the first splitter prototypes soon!

item link: http://www.c7carbon.com/for-c5-corve...on-fiber-p-674





Let us know how we can help

**************************************** ****************

EDIT 06/13/18
Here are the updated pictures of the Vented front splitter installed on our shop C5

We also have a special Intro price available for the first 20 Carbon Fiber splitters at $379* + s/h! each

Item link:
http://www.c7carbon.com/for-c5-corve...on-fiber-p-676

*Sales Tax incurs for California orders

ErikwithAK01

Something like this, only one piece. Lots of C5 race cars out there, and the only ready-to-race/functional front aero bits are made by only 2 companies, and both only make them out of carbon, which is great if you are building a full on race car, but not cost effective.

I am currently building something like this myself, and I would have considered buying something...but it is currently all just custom fab work :/

STALION

subbed

C7 Carbon

Thank you so much for the input everyone! Our team is currently working on the first renders and we hope to post them soon, let's here some more!

FYRARMS

Just make sure you leave the center of the spoiler/splitter open for cooling. The ACP nose with integrated center opening is sweeeeeet, but I would rather just add a nice spoiler rather than replace my entire front bumper.

C7 Carbon

Thanks again guys! the new project renders are about to be completed, stay tuned!

neutron82

I like the one posted by fyrarms but personally I would prefer a little less aggressive version... I am not opposed to cutting my bumper to match the opening in the splitter and allow even more air to get through, I had actually already been thinking about doing that anyway

2_hotty

A little less aggressive would appeal to me more as well. Also, yes make sure it can still breath. I already have your carbon fiber ZR1 side skirts, and your race wing. I don't have a splitter to complete the look because I can't find one that I like that doesn't block airflow.

C7 Carbon

Thanks again guys, we are taking notes!

neutron82

when are you guys planning on having these ready to go?... I just bought some side skirts and will be looking for a splitter as well... as of right now I like the one apsis makes the best but I want to see how this turns out before I make a decision

Proletariat designs

Things needed for me to buy one.
Keep the center open for breathing.
Undertray attachment points.
Turnbuckles for support.

BTW excited to see where this goes. I'm nterested in both a half bumper and just a splitter.

ferrmaro

Here's what I would like. Something simple and perhaps a bit lower than what is pictured.

STALION

This looks good, but looks as though the bumper has also been modified for additional airflow

FYRARMS

^ That appears to be the full ACP World Challenge bumper, and they attached a splitter directly to the bottom of the bumper instead of using the spacers. You can see the spacers in my post above. Post #5.

striper

The only thing Iwould change is for it to be narrower where it wraps around the sides. Adjusting/reinforcing bars look good.

neutron82

I like the one on the blue car, I would be willing to cut my bumper to make the opening larger... is that the same splitter as the one on the red car you posted above it?... the one on the red car looks a lot more aggressive but it could be the angle of the pic

STALION

THIS! If a front bumper can be made with a similar opening like the ACP, but with a narrower chin spoiler at the corners it would be gold.

C7 Carbon

Thanks again guys! on of our projects is precisely the front splitter with center ventilation. We hope to post news on this very soon

FYRARMS

No, the bumper is the same, but the splitter is different. Would be a piece of cake to make your own splitter, really. Just a big ol' piece of material cut to size with some mounting holes in it!

ErikwithAK01

This is what I am doing to my car. It is a cut stock bumper, matched with a Vortex lip. However, it is hardly functional with just this, that is why I'm going to integrate an undertray/splitter with at least 2" of overhang. You win't get any usable downforce without at LEAST 2" protruding from the foot print of the bumper.