When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How many here have added the fender hash stripes and have you kept them or taken them off a short while later. Akso if you have them could you post some pics please. I know i can google it and i have but it seems you guys have nicer looking rides than google does.
Last edited by Oldandslow; Apr 2, 2018 at 07:26 PM.
I have heard people (mostly non-vette types) say that the stripes mean your a gay owner
(not tryin' to sturr the hornets nest here) just relayin' what I have heard.
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I added them to my '00 coupe not long after I bought it. Kept the stripes on the car until I sold it - probably 6-7 years total time on the car. Here's a pic:
And here are the measurements on how I set mine up:
If you like the look of the fender stripes, put them on. Doesn't matter what others think. And if they are just vinyl and not paint, you can always remove them later with little problem.
Haven't added them to my current '03 because I have enough stripes on the car now.
I added them to my '00 coupe not long after I bought it. Kept the stripes on the car until I sold it - probably 6-7 years total time on the car. Here's a pic:
And here are the measurements on how I set mine up:
If you like the look of the fender stripes, put them on. Doesn't matter what others think. And if they are just vinyl and not paint, you can always remove them later with little problem.
Haven't added them to my current '03 because I have enough stripes on the car now.
Those look great and thanks for the measurements. I dont really care what others think aboit my Vette as it only needs to please me but seeing yours has my mind made up i think.
Last edited by Oldandslow; Apr 2, 2018 at 07:48 PM.
I got some vinyl one's on, looks just like Jack's, I need to remove them. Either I didn't clean it well or needed adhesion promoter, the edges on one side didn't stick good and it's a PIA to remove.
From: Garfield Heights (AKA:Garbage Hts.) Ohio USA
Cruise-In VII Veteran
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18
Oldtimer
I used plasti-dip for mine in 2012. I like them so much that I did the other side too! Had lots of nice compliments and no one ever criticized or said they are gay.
I made a template from construction paper then went to fast signs and had them make them. Once they scan in the computer they can reprint anytime in any color combo. It was about 30 bucks.
If you like it, go for it! Our GS doesn't have them, we want to go for a different look. Don't let somebody else tell you what YOUR car should look like!!
Anyone do it with a carbon fiber look? I'm in the process of wrapping a roof, and doing the side mirrors in a carbon fiber. Can't decide if I want to do the fender stripe.
If you like it, go for it! Our GS doesn't have them, we want to go for a different look. Don't let somebody else tell you what YOUR car should look like!!
I have heard people (mostly non-vette types) say that the stripes mean your a gay owner
(not tryin' to sturr the hornets nest here) just relayin' what I have heard.
I have heard people (mostly non-vette types) say that the stripes mean your a gay owner
(not tryin' to sturr the hornets nest here) just relayin' what I have heard.
Guess I'm a happy owner then. Not the best picture, but all I have at the moment. I got mine from Vettestripes.com maybe 4 years ago. Liked it so much, I had him send me extra material last year so I could make custom cut pieces to extend the look into the engine bay on my painted RPI fender covers. The angle of the picture makes them look off a bit, but they are nicely matched to the outer fender. Gets lots of compliments on the idea and finished product. He had pics on his website that I sent him, but admittedly, they were taken with a poor cell phone and before I lowered the car and got new wheels.
Anyone do it with a carbon fiber look? I'm in the process of wrapping a roof, and doing the side mirrors in a carbon fiber. Can't decide if I want to do the fender stripe.
I had a strip of that faux-feel carbon fiber vinyl left over from a project and attempted it. My issue was the rear portion of the stripe had a heck of a time developing curvature to meet the fender. I eventually just stopped while I was ahead. If I were to seriously consider it again I'd probably get a vinyl piece that had a CF pattern printed on it rather than with a faux-feel.
slightly off topic I did wrap the A pillar triangles with it though. As that was black already it gave a nice contrast to body colored mirrors and door.
Thinking about adding the fender hash stripes.
Not the best picture, but all I have at the moment. I got mine from Vettestripes.com maybe 4 years ago. Liked it so much, I had him send me extra material last year so I could make custom cut pieces to extend the look into the engine bay on my painted RPI fender covers. The angle of the picture makes them look off a bit, but they are nicely matched to the outer fender. Gets lots of compliments on the idea and finished product. He had pics on his website that I sent him, but admittedly, they were taken with a poor cell phone and before I lowered the car and got new wheels.
