When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just got mine, they look awesome, the only thing is that the cashmere color is not the same of my stock 2007 C6 interior, other than that superb construction.
These are mine I got from Ridies and it took me about 3 hours going slowly. Also replaced the bottom foam and let set in the sun for a couple of hours while I cleaned the carpets. Almost all of the wrinkles came out and after they were warm.
Nice! These look terrific, is this their color version of Oak?
I recently ordered leather seat covers in Firethorn, which they call Mahogony, seemingly a very hard color to find. Arrival took about two weeks. Initial inspection shows as close a color match as could be imagined. Near impossible to tell the difference between original Firethorn and their replacement Mahogony. Quality and workmanship looks to be at a very high level. I didn't buy their foam, which I thought pricey, due to my upholsterer advising that he can provided the necessary foam at a lower cost. I've gotten delayed on getting the actual work done but will report back to the membership with photos and my upholsterers opinion of the Ridies product. Shouldn't be much longer.
Thank you Mike, they are very nice.. Today I received my Blood pressure cuffs to replace my OEM lumbar bladders and side wing bolsters.. Over 19 years those bladders just deteriorated. Buying New OEM bladders cost 300 dollars a seat, 2 lumbar ( upper and lower ) and two side wing bolsters. I just received my Blood Pressure cuffs today ( cost was 40 dollars a seat {2 infant cuffs for the side bolsters and two adult cuffs for the lumbars } ) ( from eBay) took one seat out today and added the cuffs.. took about 2 hours. They work perfectly
Bill
I got all new updated oem bladders for both seats for $190 shipped....worked perfect..
I recently ordered leather seat covers in Firethorn, which they call Mahogony, seemingly a very hard color to find. Arrival took about two weeks. Initial inspection shows as close a color match as could be imagined. Near impossible to tell the difference between original Firethorn and their replacement Mahogony. Quality and workmanship looks to be at a very high level. I didn't buy their foam, which I thought pricey, due to my upholsterer advising that he can provided the necessary foam at a lower cost. I've gotten delayed on getting the actual work done but will report back to the membership with photos and my upholsterers opinion of the Ridies product. Shouldn't be much longer.
I think you'll be pleased with what the upholsterer has to say. I had mine installed by a guy who does custom cars, and he was pretty impressed by the quality of the leather.
I think you'll be pleased with what the upholsterer has to say. I had mine installed by a guy who does custom cars, and he was pretty impressed by the quality of the leather.
Ridies, you guys went AWOL for quite awhile, and many of us tried to contact you for a variety of reasons. Was there a change in management or attitude?
Ridies, you guys went AWOL for quite awhile, and many of us tried to contact you for a variety of reasons. Was there a change in management or attitude?
We weren't sponsoring this forum for a year or so, but now we are back here.
From where?
Gathering info and parts I need to redo my seats this fall.
C&S corvettes....do a search on youtube as the vids are good. I believe his name is lyle..but it was like a year ago....they are better quality then stock and work perfect. I was going to do the bladders but I needed all 4 bladders on both seats so the cost to me was not much different. Plus it took like 30 mins to do all of them...well worth it to me
@Ridies Nice to see you guys back. I've been chewing on pulling the trigger for some time now. Can you clear up some confusion for me? I'm seeing conflicting reports. Is embroidery still available for the "Corvette" script on the center top of the seat like factory still?
@Ridies Nice to see you guys back. I've been chewing on pulling the trigger for some time now. Can you clear up some confusion for me? I'm seeing conflicting reports. Is embroidery still available for the "Corvette" script on the center top of the seat like factory still?
No, we don't do corvette flags and/or CORVETTE script. We can do custom logos though for extra $50.00.
These are mine I got from Ridies and it took me about 3 hours going slowly. Also replaced the bottom foam and let set in the sun for a couple of hours while I cleaned the carpets. Almost all of the wrinkles came out and after they were warm.
Hey Mike1 - if you're still around do you recall what color these are to match lt oak? leather/nappa?
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.