Need a measurement for custom wheels
05-30-2019, 04:28 PM
#1
Need a measurement for custom wheels
I need the measurement of the length from the hub flange to the end of the hub. Looking for front and rear measurements. I'm looking at some custom-made Klutch SL5 wheels, and they need to know to ensure that this length isn't too long. If it is, they have to open up the center hub bore hole in the wheel. Also... is there an end cap on the hub that would need to be accounted for? See attached (crappy) picture for reference on the measurement i seek.
05-30-2019, 05:39 PM
#2
Race Director
Pro Mechanic
Member Since: Mar 2004
Location: Fort Wayne IN
Posts: 12,250
Received 813 Likes
on
431 Posts
C5 of Year Finalist (performance mods) 2019
2017 C5 of the Year Finalist
2016 C5 of the Year Finalist
2015 C5 of the Year Finalist
I Believe In The Beer Fairy
Just measured on my 99 and I got 12.47mm or 0.491 inch. So roughly half an inch.
The following users liked this post:
Ldorris (05-30-2019)