2001 Vette
Thread Starter
Heel & Toe
Joined: Feb 2020
Posts: 18
Likes: 2
2001 Vette
Update:
New member here and I been asking a few questions about buying a corvette.
Well the other day I put a deposit on a 2001 vette. Buying from a dealership at $17,000 with 42,000 miles. Very clean vehicle both inside and out. There even is no wear on the bump out part of the drivers seat. The vehicle spent most of it's time in California and a little time here in Ohio. I'll try to post a picture next week went I get it home.
The car has 6 small chips in the paint, a couple around the front bumper and a couple by the convertible top and one near the rear bumper. What I'm surprised of it has no chips in the rockers panels and fender wells. The paint has not been repaired in any way that I can tell and I use to paint cars so I have some knowledge of the process. The color of the paint is pewter and that is very hard to spot paint.
One question is that I noticed from other pictures of 01 vettes there is no body molding running along the front fender or door and this one has that molding. Was there an add-on that year or has this molding been added-on by an owner?
New member here and I been asking a few questions about buying a corvette.
Well the other day I put a deposit on a 2001 vette. Buying from a dealership at $17,000 with 42,000 miles. Very clean vehicle both inside and out. There even is no wear on the bump out part of the drivers seat. The vehicle spent most of it's time in California and a little time here in Ohio. I'll try to post a picture next week went I get it home.
The car has 6 small chips in the paint, a couple around the front bumper and a couple by the convertible top and one near the rear bumper. What I'm surprised of it has no chips in the rockers panels and fender wells. The paint has not been repaired in any way that I can tell and I use to paint cars so I have some knowledge of the process. The color of the paint is pewter and that is very hard to spot paint.
One question is that I noticed from other pictures of 01 vettes there is no body molding running along the front fender or door and this one has that molding. Was there an add-on that year or has this molding been added-on by an owner?
Last edited by Michael15956; Mar 5, 2020 at 06:51 PM. Reason: wrong price
Instructor
Joined: Dec 2017
Posts: 238
Likes: 84
From: Mechanicsville Va
Just a body side molding on with double stick tape. If you like it leave it, if not it is easy to remove. Most don't leave much if any difference in the paint from sun fade. My preference is no bsm looks cleaner to me.
Race Director
Joined: May 2003
Posts: 14,137
Likes: 2,985
From: Iowa
St. Jude Donor '03 thru '26
Congrats and welcome to the Corvette forum 
The BSM (body side molding) was an option. Of the five C5s I've owned, 2 had them and 3 did not. I'm starting to prefer the C5 without them but too afraid to take them off 20 year old paint, there has got to be sun fade
The BSM (body side molding) was an option. Of the five C5s I've owned, 2 had them and 3 did not. I'm starting to prefer the C5 without them but too afraid to take them off 20 year old paint, there has got to be sun fade
Racer
Joined: Jun 2019
Posts: 457
Likes: 322
From: Gulf Coast, FL
My ‘00 has them and I like ‘em. The C5 looks great either way albeit “cleaner” without but I like the extra protection. I’ve read that fishing line can be used to separate the moulding tape from the panel. Lighter fluid is an inexpensive way to loosen/dissolve sticky residue. Ultimately it’s your call. Congrats and I hope you get it!
Last edited by Hepcat; Mar 7, 2020 at 08:57 AM. Reason: Typo
Administrator
Joined: Mar 2001
Posts: 368,522
Likes: 24,823
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Yep, the body side molding was an option on the car. As stated, double sided tape holds it on, but after this many years, there could be some fade in the surrounding paint shoud you try to take them off.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Racer
Joined: Jun 2019
Posts: 457
Likes: 322
From: Gulf Coast, FL
https://www.xpel.com/paint-protectio.../Corvette/Base
