When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
anyone know of company selling front fender for the c5? picture if available. i got some l5 rear quarter panel flares. now looking for some fronts. thx.
If you can't easily find a solution, another way to add flaring to the front would be c7 Z06 liners/spats. From what I've read, it's not too difficult but the look might not be for everyone.
I was working on some a while back mainly to cover wider tires for the track. These pics were just prototypes and were actually still just foam. I still need to do the fronts, I figured especially back then, that people on here would rip on them. but I think they could be done to look good and even cover a little wheel gap with the ride height properly set up for the track without drop spindles.
Would definitely make changes on the second try. I was hoping K.I.T.T. Would do them so I wouldn't have to.
I was working on some a while back mainly to cover wider tires for the track. These pics were just prototypes and were actually still just foam. I still need to do the fronts, I figured especially back then, that people on here would rip on them. but I think they could be done to look good and even cover a little wheel gap with the ride height properly set up for the track without drop spindles. Attachment 48310920Attachment 48310921
Would definitely make changes on the second try. I was hoping K.I.T.T. Would do them so I wouldn't have to.
If these were actually made with quality material, I would be a buyer....I like it!!!
but I think they could be done to look good and even cover a little wheel gap with the ride height properly set up for the track without drop spindles. 
