part availability
Thread Starter
Racer
Joined: Nov 2015
Posts: 442
Likes: 151
From: Port Charlotte Florida
part availability
any info on availability of replacement steering column clam shells for a c5? c6 pieces all over ebay but no c5 models. I understand the c5 part has a common failure, should have a vender supplier somewhere.
Le Mans Master
Joined: Feb 2021
Posts: 6,405
Likes: 4,239
From: Florida
2025 Corvette of the Year Finalist - Unmodified
2024 C5 of the Year Winner- Unmodified
2022 C5 of the Year Finalist - Unmodified
Vettenuts and here’s a couple more C5 dismantlers:
Vet pros
https://www.lscandyshop.com/ebay-ecommerce
https://aescorvetteparts.com/
Vet pros
https://www.lscandyshop.com/ebay-ecommerce
https://aescorvetteparts.com/
Last edited by vette4fl; Aug 15, 2022 at 03:18 AM.
Race Director
Joined: Oct 2004
Posts: 12,795
Likes: 4,614
Just my .02, but finding one with no damage at all will probably be tough. I bought one from Vettenuts, and by using some JB Weld, and some plastic from my original one, I was able to make a very nice one out of 2 different parts. Timing is everything. When I talked to Marc, he told me he didn't have any pristine ones at that time, but would send me the best one he had. At this current time, he may have that pristine part. Give him a call, he is an honest, straight shooter. Another place is C&S Corvettes in Florida. Good luck to you......
Thread Starter
Racer
Joined: Nov 2015
Posts: 442
Likes: 151
From: Port Charlotte Florida
Thanks for all of the suggestions. I think that I lucked out and found a good one from Corvette Salvage in PA. The owner says it looks nice and is on its way. 50bucks +15 shipping is not bad I believe.
