2-Step Function
Thread Starter
Running Guns & Moonshine
Joined: Aug 2001
Posts: 12,501
Likes: 7,184
From: CT
2-Step Function
I will have to trace the wires on the new coupe to verify function. The car has this 2-step installed.
I fully understand the installation setup but I do not understand how to use it live out in the world.
I would have thought something like this would have a button. But maybe it has a clutch switch activation?
I just don't understand how that functions.
https://documents.holley.com/fe14c7e...89956bd99e.pdf
I fully understand the installation setup but I do not understand how to use it live out in the world.
I would have thought something like this would have a button. But maybe it has a clutch switch activation?
I just don't understand how that functions.
https://documents.holley.com/fe14c7e...89956bd99e.pdf
Administrator
Joined: Mar 2001
Posts: 367,774
Likes: 24,683
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Moving this over to C5 Tech.
Burning Brakes
Joined: Dec 2022
Posts: 1,023
Likes: 887
From: Nappytown MD
you could hook up the White/Blue to a 12v brake light signal line (by the pedal under the dash) so it is activated when the brake is applied or you could use the blue wire and hook it to a switch/button and ground it when you hit the switch to activate it. You only use ONE of the wires for activation, either a 12V HOT source like the brake pedal or a Ground source via a button or switch etc.
