[Z06] Speedworks Rocks
May 6, 2003 | 07:22 PM
Thread Starter
Racer
Joined: Mar 2003
Posts: 347
Likes: 0
From: Plano TX
Speedworks Rocks
Had my car in today getting it tuned up. Put new plugs in it, oil and thermostat. Anyway come to find out I had three fouled plugs and one burnt spark plug wire. They also adjusted my parking brake, adjusted my exhaust and readjusted LS1 Edit so that my car would idle better and the fans would come on sooner because of the new thermostat. The adjustments were done without me even asking except for the fans for the thermostat. Dan, James and Sean are awesome and they do great work. If anyone is looking for a shop in Dallas then I would highly recommend them. Thanks guys :hurray: :thumbs:
May 6, 2003 | 07:58 PM
Racer
Joined: Mar 2003
Posts: 415
Likes: 1
From: DFW Texas
Re: Speedworks Rocks (ixlr8)
What year model is your Z and how many miles? What did they charge for all that? Thanks :flag
May 6, 2003 | 09:36 PM
Burning Brakes
Joined: Feb 2001
Posts: 929
Likes: 0
From: Dallas TX
Re: Speedworks Rocks (ixlr8)
Speedworks is a great place. They do great work, and take care of their folks. They had all of my business when I had my Vette. :party:
May 6, 2003 | 11:54 PM
Advanced
Joined: Feb 2002
Posts: 56
Likes: 0
From: tampa fl
Re: Speedworks Rocks (ixlr8)
I have also experienced the excellence of their work on my cars and great customer service. Infact, I will not let anyone else work on my cars. :hurray:
[Modified by BHaggard, 4:57 AM 5/7/2003]
May 7, 2003 | 10:55 AM
Thread Starter
Racer
Joined: Mar 2003
Posts: 347
Likes: 0
From: Plano TX
Re: Speedworks Rocks (Vegasr)
My car is an 01 Z06 with almost 27K miles. It was cheap. :thumbs:
May 7, 2003 | 02:30 PM
Burning Brakes
Joined: Mar 2002
Posts: 1,176
Likes: 0
From: highland village texas
Re: Speedworks Rocks (ixlr8)
SpeedWorks has always been very fair me...lots of good advice from Dan before I had any work done, and James knows LS1-edit.
May 7, 2003 | 02:51 PM
Drifting
Joined: Jul 2002
Posts: 1,319
Likes: 0
From: mansfield Texas
Cruise-In IV Veteran
Cruise-In V Veteran
Re: Speedworks Rocks (C5 CU)
I need to go in and re-dyno after the FLP long tubes.
Darwin.
May 7, 2003 | 03:29 PM
Advanced
Joined: Sep 2002
Posts: 79
Likes: 0
From: Coppell TX
Re: Speedworks Rocks (dbarbosa)
dbarbosa,
would be interesting to see what you dyno there as compared to other places in town.
JWz06
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
May 7, 2003 | 03:40 PM
Drifting
Joined: Jul 2002
Posts: 1,319
Likes: 0
From: mansfield Texas
Cruise-In IV Veteran
Cruise-In V Veteran
Re: Speedworks Rocks (JWz06)
Bro I dynoed almost 20 rwhp higher Speedworks before.
Darwin.
May 7, 2003 | 03:51 PM
Thread Starter
Racer
Joined: Mar 2003
Posts: 347
Likes: 0
From: Plano TX
Re: Speedworks Rocks (dbarbosa)
:confused: You dynoed 20hp higher at Speedworks than another place in town?
May 7, 2003 | 04:19 PM
Drifting
Joined: Jul 2002
Posts: 1,319
Likes: 0
From: mansfield Texas
Cruise-In IV Veteran
Cruise-In V Veteran
Re: Speedworks Rocks (ixlr8)
:yesnod: :yesnod:
Everybody's dyno is diff.
It was roughly three weeks time diff. in Sept last year.
Weather conditions where close to the same.
Darwin.