[Z06] Transport Tie Down Hooks
Thread Starter
Cruising
Joined: Aug 1999
Posts: 13
Likes: 0
Transport Tie Down Hooks
I am looking for suggestions on what anyone is using is the way of tie down hooks for transporting on a trailer. My 10,000 pound test ratchet tie down hooks do not fit it the frame holes. I have to use 2,500 pound tie downs that fit in the holes. Any suggestions?
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 9
From: Buy USA products! Check the label! Employ Americans
Re: Transport Tie Down Hooks (Connell)
Go to a wrecker supply there are J hooks that fit right in those holes and then you clip the ratchet to them. If you need a picture I'll send one. Maybe someone has a link to a supplier. A&W Direct has them look for a website for them.
[Modified by John Shiels, 8:51 PM 6/4/2003]
[Modified by John Shiels, 8:51 PM 6/4/2003]
Racer
Joined: Oct 2002
Posts: 473
Likes: 54
From: Addison TX
Re: Transport Tie Down Hooks (Connell)
Here's the link to exactly what you need. These hook into the factory holes in the frame behind the front wheels and in front of the rear wheels. You need 4. http://www.awdirect.com/awdirect/cat...ion&linkid=110
