[Z06] Service Active Handling on DIC
Thread Starter
Racer
Joined: Sep 2003
Posts: 319
Likes: 0
From: N.Y
Service Active Handling on DIC
Cruising with the 04 Z06 with 325 miles on it, and the DIC displays, Service Active Handling System Soon. The yellow symbol also displays on dash. Has anyone encountered this problem,and if so what was the problem ,and what type of service was needed ? I would appreciate any advice. Thanks Joey :steering:
Racer
Joined: Apr 2002
Posts: 344
Likes: 0
From: Fremont CA
CI 3-5-8 Veteran
Re: Service Active Handling on DIC (JoeyNigs)
I have noticed on both of my cars that if I am rolling while the start-up diags are still running, that I will get these messages. I have to stop and restart the engine to clear the messages.
Neil.
Neil.
Le Mans Master
Joined: Jun 2001
Posts: 7,331
Likes: 518
From: Admit Nothing, Deny Everything, Make Counter Accusations.
Re: Service Active Handling on DIC (JoeyNigs)
What is the code? Retrieve it from the D.I.C. Follow the instructions here, but do not delete it yet:
https://www.corvetteforum.com/techti...D=25&TopicID=1
https://www.corvetteforum.com/techti...D=25&TopicID=1
Intermediate
Joined: Jan 2003
Posts: 33
Likes: 0
From: Lewisville tx
Re: Service Active Handling on DIC (JoeyNigs)
In the front right fender there are 3 computers that control the information going to the active handling system and traction control, mine gave this info on the DIC, also service traction control and reduced engine speed. If this is also the case for you, have the dealership check the molex plugs and the pins in the plugs, one of my pins in one of the plugs was not seated correctly and caused all sorts of poopie. Took the dealer 4 trips to figure this out by the way
