[Z06] Cam change time, what's involved?
Thread Starter
Instructor
Joined: Mar 2004
Posts: 136
Likes: 5
From: Houston TX
Cam change time, what's involved?
Just wondering what you need to remove to get at the cam on the Corvette. I have done many Camaro cam swaps but it looks like the Corvette is more difficult because of the steering rack. I figure the rack must be removed as well as the radiator. Thanks,
Paul J.
Paul J.
Melting Slicks
Joined: Jan 2004
Posts: 2,158
Likes: 4
From: Henderson Nevada
Re: Cam change time, what's involved? (RedHotZO6)
Just one other thing you should know (you may already). The cam bearing are all the same size in the 'Vette blocks; earlier Chevy small blocks had slightly larger bearings at the front. Therefore, be verrrry careful when inserting the cam, 'cause it is easier to damage the bearing surfaces.
[Modified by mforman42, 9:21 PM 3/10/2004]
[Modified by mforman42, 9:21 PM 3/10/2004]
